Re: [PATCH v3 2/3] venus: enable sufficient sequence change support for vp9

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 4.05.2023 11:39, Dikshita Agarwal wrote:
> VP9 supports resolution change at interframe.
> Currenlty, if sequence change is detected at interframe and
> resources are sufficient, sequence change event is not raised
> by firmware to driver until the next keyframe.
> This change add the HFI to notify the sequence change in this
> case to driver.
> 
> Signed-off-by: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
> Signed-off-by: Viswanath Boma <quic_vboma@xxxxxxxxxxx>
> Signed-off-by: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
> Tested-by: Nathan Hebert <nhebert@xxxxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  drivers/media/platform/qcom/venus/hfi_cmds.c   | 1 +
>  drivers/media/platform/qcom/venus/hfi_helper.h | 2 ++
>  drivers/media/platform/qcom/venus/vdec.c       | 8 ++++++++
>  3 files changed, 11 insertions(+)
> 
> diff --git a/drivers/media/platform/qcom/venus/hfi_cmds.c b/drivers/media/platform/qcom/venus/hfi_cmds.c
> index 930b743..e2539b5 100644
> --- a/drivers/media/platform/qcom/venus/hfi_cmds.c
> +++ b/drivers/media/platform/qcom/venus/hfi_cmds.c
> @@ -521,6 +521,7 @@ static int pkt_session_set_property_1x(struct hfi_session_set_property_pkt *pkt,
>  		pkt->shdr.hdr.size += sizeof(u32) + sizeof(*en);
>  		break;
>  	}
> +	case HFI_PROPERTY_PARAM_VDEC_ENABLE_SUFFICIENT_SEQCHANGE_EVENT:
>  	case HFI_PROPERTY_CONFIG_VDEC_POST_LOOP_DEBLOCKER: {
>  		struct hfi_enable *in = pdata;
>  		struct hfi_enable *en = prop_data;
> diff --git a/drivers/media/platform/qcom/venus/hfi_helper.h b/drivers/media/platform/qcom/venus/hfi_helper.h
> index d2d6719..2e03b6e 100644
> --- a/drivers/media/platform/qcom/venus/hfi_helper.h
> +++ b/drivers/media/platform/qcom/venus/hfi_helper.h
> @@ -469,6 +469,8 @@
>  #define HFI_PROPERTY_PARAM_VDEC_PIXEL_BITDEPTH			0x1003007
>  #define HFI_PROPERTY_PARAM_VDEC_PIC_STRUCT			0x1003009
>  #define HFI_PROPERTY_PARAM_VDEC_COLOUR_SPACE			0x100300a
> +#define HFI_PROPERTY_PARAM_VDEC_ENABLE_SUFFICIENT_SEQCHANGE_EVENT \
> +								0x100300b
>  
>  /*
>   * HFI_PROPERTY_CONFIG_VDEC_COMMON_START
> diff --git a/drivers/media/platform/qcom/venus/vdec.c b/drivers/media/platform/qcom/venus/vdec.c
> index 4ceaba3..f0394b9 100644
> --- a/drivers/media/platform/qcom/venus/vdec.c
> +++ b/drivers/media/platform/qcom/venus/vdec.c
> @@ -671,6 +671,14 @@ static int vdec_set_properties(struct venus_inst *inst)
>  			return ret;
>  	}
>  
> +	/* Enabling sufficient sequence change support for VP9 */
> +	if (is_fw_rev_or_newer(inst->core, 5, 4, 51)) {
> +		ptype = HFI_PROPERTY_PARAM_VDEC_ENABLE_SUFFICIENT_SEQCHANGE_EVENT;
> +		ret = hfi_session_set_property(inst, ptype, &en);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	ptype = HFI_PROPERTY_PARAM_VDEC_CONCEAL_COLOR;
>  	conceal = ctr->conceal_color & 0xffff;
>  	conceal |= ((ctr->conceal_color >> 16) & 0xffff) << 10;



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux