Re: [PATCH 1/4] dt-bindings: thermal: tsens: Add ipq9574 compatible

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/05/2023 06:57, Varadarajan Narayanan wrote:
> On Wed, May 03, 2023 at 09:42:28AM +0200, Krzysztof Kozlowski wrote:
>> On 03/05/2023 09:10, Varadarajan Narayanan wrote:
>>> On Mon, May 01, 2023 at 09:08:49AM +0200, Krzysztof Kozlowski wrote:
>>>> On 28/04/2023 16:52, Varadarajan Narayanan wrote:
>>>>> From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
>>>>>
>>>>> Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens.
>>>>>
>>>>> Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
>>>>> Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
>>>>> ---
>>>>>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 3 +++
>>>>>  1 file changed, 3 insertions(+)
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
>>>>> index d1ec963..8e2208c 100644
>>>>> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
>>>>> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
>>>>> @@ -66,6 +66,7 @@ properties:
>>>>>        - description: v2 of TSENS with combined interrupt
>>>>>          enum:
>>>>>            - qcom,ipq8074-tsens
>>>>> +          - qcom,ipq9574-tsens
>>>>
>>>> Your drive change indicates they are compatible, so make them
>>>> compatible. 9574 followed by 8074.
>>>
>>> Not able to understand. You want IPQ9574 to use "qcom,ipq8074-tsens"
>>> instead of adding a "qcom,ipq9574-tsens" and no need to add an extra
>>> entry to the driver like
>>
>> Assuming the devices are really compatible, which your driver change
>> suggests, I want to use two compatibles. 9574 followed by 8074 fallback,
>> just like we do for all Qualcomm IP blocks. Then as you said - no need
>> for driver change.
> 
> With schema like this
> 	items:
> 	  - enum:
> 	      - qcom,ipq8074-tsens
> 	      - qcom,ipq9574-tsens
> and DTS as
> 	compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens";

This file (and many others) shows you how to encode it in the DT schema

https://elixir.bootlin.com/linux/v6.3-rc6/source/Documentation/devicetree/bindings/sound/nvidia,tegra210-ope.yaml#L31

> 
> 'make dtbs_check' gives the following error
> 
> arch/arm64/boot/dts/qcom/ipq9574-rdp433.dtb: thermal-sensor@4a9000: compatible: 'oneOf' conditional failed, one must be fixed:
>         ['qcom,ipq9574-tsens', 'qcom,ipq8074-tsens'] is too long
> 
> To fix the above error, I have to change the schema as
> 
> 	items:
> 	  - enum:
> 	      - qcom,ipq8074-tsens
> 	      - qcom,ipq9574-tsens
> 	  - const: qcom,tsens-v2-combined-int

This is not what we talked about.

Best regards,
Krzysztof




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux