Add device tree binding Documentation details for Qualcomm SDX75 pinctrl driver. Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- .../bindings/pinctrl/qcom,sdx75-tlmm.yaml | 169 +++++++++++++++++++++ 1 file changed, 169 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml new file mode 100644 index 0000000..7ebc69d --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdx75-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SDX75 TLMM block + +maintainers: + - Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SDX75 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sdx75-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 67 + + gpio-line-names: + maxItems: 133 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdx75-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdx75-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdx75-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ gpio, eth0_mdc, eth0_mdio, eth1_mdc, eth1_mdio, + qlink0_wmss_reset, qlink1_wmss_reset, rgmii_rxc, rgmii_rxd0, + rgmii_rxd1, rgmii_rxd2, rgmii_rxd3, rgmii_rx_ctl, rgmii_txc, + rgmii_txd0, rgmii_txd1, rgmii_txd2, rgmii_txd3, rgmii_tx_ctl, + adsp_ext_vfr, atest_char_start, atest_char_status0, + atest_char_status1, atest_char_status2, atest_char_status3, + audio_ref_clk, bimc_dte_test0, bimc_dte_test1, + char_exec_pending, char_exec_release, coex_uart2_rx, + coex_uart2_tx, coex_uart_rx, coex_uart_tx, cri_trng_rosc, + cri_trng_rosc0, cri_trng_rosc1, dbg_out_clk, ddr_bist_complete, + ddr_bist_fail, ddr_bist_start, ddr_bist_stop, ddr_pxi0_test, + ebi0_wrcdc_dq2, ebi0_wrcdc_dq3, ebi2_a_d, ebi2_lcd_cs, + ebi2_lcd_reset, ebi2_lcd_te, emac0_mcg_pst0, emac0_mcg_pst1, + emac0_mcg_pst2, emac0_mcg_pst3, emac0_ptp_aux, emac0_ptp_pps, + emac1_mcg_pst0, emac1_mcg_pst1, emac1_mcg_pst2, emac1_mcg_pst3, + emac1_ptp_aux0, emac1_ptp_aux1, emac1_ptp_aux2, emac1_ptp_aux3, + emac1_ptp_pps0, emac1_ptp_pps1, emac1_ptp_pps2, emac1_ptp_pps3, + emac_cdc_dtest0, emac_cdc_dtest1, emac_pps_in, ext_dbg_uart, + gcc_125_clk, gcc_gp1_clk, gcc_gp2_clk, gcc_gp3_clk, + gcc_plltest_bypassnl, gcc_plltest_resetn, i2s_mclk, + jitter_bist_ref, ldo_en, ldo_update, m_voc_ext, mgpi_clk_req, + native0, native1, native2, native3, native_char_start, + native_tsens_osc, native_tsense_pwm1, nav_dr_sync, nav_gpio_0, + nav_gpio_1, nav_gpio_2, nav_gpio_3, pa_indicator_1, pci_e_rst, + pcie0_clkreq_n, pcie1_clkreq_n, pcie2_clkreq_n, pll_bist_sync, + pll_clk_aux, pll_ref_clk, pri_mi2s_data0, pri_mi2s_data1, + pri_mi2s_sck, pri_mi2s_ws, prng_rosc_test0, prng_rosc_test1, + prng_rosc_test2, prng_rosc_test3, qdss_cti_trig0, + qdss_cti_trig1, qdss_gpio_traceclk, qdss_gpio_tracectl, + qdss_gpio_tracedata0, qdss_gpio_tracedata1, + qdss_gpio_tracedata10, qdss_gpio_tracedata11, + qdss_gpio_tracedata12, qdss_gpio_tracedata13, + qdss_gpio_tracedata14, qdss_gpio_tracedata15, + qdss_gpio_tracedata2, qdss_gpio_tracedata3, + qdss_gpio_tracedata4, qdss_gpio_tracedata5, + qdss_gpio_tracedata6, qdss_gpio_tracedata7, + qdss_gpio_tracedata8, qdss_gpio_tracedata9, qlink0_b_en, + qlink0_b_req, qlink0_l_en, qlink0_l_req, qlink1_l_en, + qlink1_l_req, qup_se0_l0, qup_se0_l1, qup_se0_l2, qup_se0_l3, + qup_se1_l2, qup_se1_l3, qup_se2_l0, qup_se2_l1, qup_se2_l2, + qup_se2_l3, qup_se3_l0, qup_se3_l1, qup_se3_l2, qup_se3_l3, + qup_se4_l2, qup_se4_l3, qup_se5_l0, qup_se5_l1, qup_se6_l0, + qup_se6_l1, qup_se6_l2, qup_se6_l3, qup_se7_l0, qup_se7_l1, + qup_se7_l2, qup_se7_l3, qup_se8_l2, qup_se8_l3, qup_se1_l2_mira, + qup_se1_l2_mirb, qup_se1_l3_mira, qup_se1_l3_mirb, sdc1_tb_trig, + sdc2_tb_trig, sec_mi2s_data0, sec_mi2s_data1, sec_mi2s_sck, + sec_mi2s_ws, sgmii_phy_intr0, sgmii_phy_intr1, spmi_coex_clk, + spmi_coex_data, spmi_vgi_hwevent, tgu_ch0_trigout, + tri_mi2s_data0, tri_mi2s_data1, tri_mi2s_sck, tri_mi2s_ws, + uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, + uim2_data, uim2_present, uim2_reset, usb2phy_ac_en, + vsense_trigger_mirnat] + + required: + - pins + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@f100000 { + compatible = "qcom,sdx75-tlmm"; + reg = <0x0f100000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 133>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-wo-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-state { + rx-pins { + pins = "gpio12"; + function = "qup_se1_l2_mira"; + bias-disable; + }; + + tx-pins { + pins = "gpio13"; + function = "qup_se1_l3_mira"; + bias-disable; + }; + }; + }; +... -- 2.7.4
