On 1.05.2023 12:58, Bhupesh Sharma wrote:
> Add the default and sleep pinctrl states for SDHC1 & 2 controllers
> on QRB4210 RB2 board.
>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> index dc80f0bca767..5a5294cc6e45 100644
> --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
> @@ -190,6 +190,10 @@ vreg_l24a_2p96: l24 {
> };
>
> &sdhc_1 {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sdc1_state_on>;
> + pinctrl-1 = <&sdc1_state_off>;
property-n
property-names
Other than that:
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> +
> vmmc-supply = <&vreg_l24a_2p96>;
> vqmmc-supply = <&vreg_l11a_1p8>;
> no-sdio;
> @@ -200,6 +204,10 @@ &sdhc_1 {
>
> &sdhc_2 {
> cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; /* card detect gpio */
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sdc2_state_on &sdc2_card_det_n>;
> + pinctrl-1 = <&sdc2_state_off &sdc2_card_det_n>;
> +
> vmmc-supply = <&vreg_l22a_2p96>;
> vqmmc-supply = <&vreg_l5a_2p96>;
> no-sdio;
> @@ -216,6 +224,13 @@ &tlmm {
> <49 1>, <52 1>, <54 1>,
> <56 3>, <61 2>, <64 1>,
> <68 1>, <72 8>, <96 1>;
> +
> + sdc2_card_det_n: sd-card-det-n-state {
> + pins = "gpio88";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> };
>
> &uart4 {
