Re: [PATCH v10 3/4] arm64: dts: qcom: sm6115: Add USB SS qmp phy node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2.05.2023 07:35, Bhupesh Sharma wrote:
> Add USB superspeed qmp phy node to dtsi.
> 
> Make sure that the various board dts files (which include sm4250.dtsi file)
> continue to work as intended.
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  .../boot/dts/qcom/sm4250-oneplus-billie2.dts  |  3 ++
>  arch/arm64/boot/dts/qcom/sm6115.dtsi          | 29 +++++++++++++++++--
>  .../boot/dts/qcom/sm6115p-lenovo-j606f.dts    |  3 ++
>  3 files changed, 33 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> index a1f0622db5a0..75951fd439df 100644
> --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> @@ -242,6 +242,9 @@ &usb {
>  &usb_dwc3 {
>  	maximum-speed = "high-speed";
>  	dr_mode = "peripheral";
> +
> +	phys = <&usb_hsphy>;
> +	phy-names = "usb2-phy";
>  };
>  
>  &usb_hsphy {
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 631ca327e064..f67863561f3f 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -661,6 +661,31 @@ usb_hsphy: phy@1613000 {
>  			status = "disabled";
>  		};
>  
> +		usb_qmpphy: phy@1615000 {
> +			compatible = "qcom,sm6115-qmp-usb3-phy";
> +			reg = <0x0 0x01615000 0x0 0x1000>;
> +
> +			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
> +				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> +				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +			clock-names = "cfg_ahb",
> +				      "ref",
> +				      "com_aux",
> +				      "pipe";
> +
> +			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
> +				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
> +			reset-names = "phy", "phy_phy";
> +
> +			#clock-cells = <0>;
> +			clock-output-names = "usb3_phy_pipe_clk_src";
> +
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
>  		qfprom@1b40000 {
>  			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
>  			reg = <0x0 0x01b40000 0x0 0x7000>;
> @@ -1111,8 +1136,8 @@ usb_dwc3: usb@4e00000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x0 0x04e00000 0x0 0xcd00>;
>  				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> -				phys = <&usb_hsphy>;
> -				phy-names = "usb2-phy";
> +				phys = <&usb_hsphy>, <&usb_qmpphy>;
> +				phy-names = "usb2-phy", "usb3-phy";
>  				iommus = <&apps_smmu 0x120 0x0>;
>  				snps,dis_u2_susphy_quirk;
>  				snps,dis_enblslpm_quirk;
> diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> index ea3340d31110..81fdcaf48926 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> @@ -306,6 +306,9 @@ &usb {
>  &usb_dwc3 {
>  	maximum-speed = "high-speed";
>  	dr_mode = "peripheral";
> +
> +	phys = <&usb_hsphy>;
> +	phy-names = "usb2-phy";
>  };
>  
>  &usb_hsphy {



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux