On Tue, 2 May 2023 at 05:43, Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:
>
> On 01/05/2023 22:24, Bhupesh Sharma wrote:
> > Add support for the new qcm2290 / sm6115 binding.
> >
> > The USB QMP phy on these devices supports 2 lanes. Also note that the
> > binding now does not describe every register subregion and instead
> > the driver holds the corresponding offsets. This also includes
> > the PCS_MISC region.
> >
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> > ---
> > drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 22 ++++++++++++++++++++++
> > 1 file changed, 22 insertions(+)
> >
> > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
> > index a49711c5a63d..aa143c081805 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
> > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
> > @@ -1414,6 +1414,10 @@ struct qmp_usb_offsets {
> > u16 pcs_usb;
> > u16 tx;
> > u16 rx;
> > + /* for PHYs with >= 2 lanes */
> > + u16 tx2;
> > + u16 rx2;
> > + u16 pcs_misc;
> > };
> >
> > /* struct qmp_phy_cfg - per-PHY initialization config */
> > @@ -1558,6 +1562,16 @@ static const char * const qmp_phy_vreg_l[] = {
> > "vdda-phy", "vdda-pll",
> > };
> >
> > +static const struct qmp_usb_offsets qmp_usb_offsets_v3 = {
> > + .serdes = 0,
> > + .pcs = 0xc00,
> > + .tx = 0x200,
> > + .rx = 0x400,
> > + .tx2 = 0x600,
> > + .rx2 = 0x800,
> > + .pcs_misc = 0xa00,
> > +};
> > +
> > static const struct qmp_usb_offsets qmp_usb_offsets_v5 = {
> > .serdes = 0,
> > .pcs = 0x0200,
> > @@ -1922,6 +1936,8 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
> > static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
> > .lanes = 2,
> >
> > + .offsets = &qmp_usb_offsets_v3,
> > +
> > .serdes_tbl = qcm2290_usb3_serdes_tbl,
> > .serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
> > .tx_tbl = qcm2290_usb3_tx_tbl,
> > @@ -2497,6 +2513,12 @@ static int qmp_usb_parse_dt(struct qmp_usb *qmp)
> > qmp->tx = base + offs->tx;
> > qmp->rx = base + offs->rx;
> >
> > + if (cfg->lanes >= 2) {
> > + qmp->tx2 = base + offs->tx2;
> > + qmp->rx2 = base + offs->rx2;
> > + qmp->pcs_misc = base + offs->pcs_misc;
>
> pcs_misc should also be usable for a single-lane PHYs.
Ok. I will make it generic in the next version.
Thanks,
Bhupesh
