Re: [PATCH v6 12/13] arm64: dts: qcom: qrb5165-rb5: Switch on TCPM usb-role-switching for usb_1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 01, 2023 at 04:53:22PM +0100, Bryan O'Donoghue wrote:
> On 01/05/2023 16:21, Jianhua Lu wrote:
> > This port node should be moved out to the block of pm8150b_typec rather than
> > usb-c-connector. Otherwise,
> > 
> > [   10.998897] OF: graph: no port node found in /soc@0/spmi@c440000/pmic@2/typec@1500
> 
uh.... This is runtime error, it doesn't matter bindings.
I haven't much experience with typc-c, so I can't address code for this.
> 
> Ports/endpoints should go in the connector.
> 
> Documentation/devicetree/bindings/connector/usb-connector.yaml
> 
> grep usb-c-connector arch/arm* -r
> 
> This dtsi should be updated
> 
> arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi != 
> Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml
> 
> ---
> bod



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux