In preparation for supporting keepalive clocks which can never be shut off
(as the platform would fall apart otherwise), make the
__DEFINE_CLK_SMD_RPM_BRANCH_PREFIX macro accept clock flags for the
active-only clock.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
drivers/clk/qcom/clk-smd-rpm.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index 887b945a6fb7..e559755a86e0 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -67,7 +67,7 @@
type, r_id, key)
#define __DEFINE_CLK_SMD_RPM_BRANCH_PREFIX(_prefix, _name, _active,\
- type, r_id, r, key) \
+ type, r_id, r, key, ao_flags) \
static struct clk_smd_rpm clk_smd_rpm_##_prefix##_active; \
static struct clk_smd_rpm clk_smd_rpm_##_prefix##_name = { \
.rpm_res_type = (type), \
@@ -102,12 +102,13 @@
.name = "xo_board", \
}, \
.num_parents = 1, \
+ .flags = (ao_flags), \
}, \
}
#define __DEFINE_CLK_SMD_RPM_BRANCH(_name, _active, type, r_id, r, key) \
__DEFINE_CLK_SMD_RPM_BRANCH_PREFIX(/* empty */, \
- _name, _active, type, r_id, r, key)
+ _name, _active, type, r_id, r, key, 0)
#define DEFINE_CLK_SMD_RPM(_name, type, r_id) \
__DEFINE_CLK_SMD_RPM(_name##_clk, _name##_a_clk, \
@@ -126,12 +127,12 @@
#define DEFINE_CLK_SMD_RPM_BRANCH(_name, type, r_id, r) \
__DEFINE_CLK_SMD_RPM_BRANCH_PREFIX(branch_, \
_name##_clk, _name##_a_clk, \
- type, r_id, r, QCOM_RPM_SMD_KEY_ENABLE)
+ type, r_id, r, QCOM_RPM_SMD_KEY_ENABLE, 0)
#define DEFINE_CLK_SMD_RPM_BRANCH_A(_name, type, r_id, r) \
__DEFINE_CLK_SMD_RPM_BRANCH_PREFIX(branch_, \
_name, _name##_a, type, \
- r_id, r, QCOM_RPM_SMD_KEY_ENABLE)
+ r_id, r, QCOM_RPM_SMD_KEY_ENABLE, 0)
#define DEFINE_CLK_SMD_RPM_QDSS(_name, type, r_id) \
__DEFINE_CLK_SMD_RPM(_name##_clk, _name##_a_clk, \
@@ -146,7 +147,7 @@
__DEFINE_CLK_SMD_RPM_BRANCH_PREFIX(_prefix, \
_name, _name##_a, \
QCOM_SMD_RPM_CLK_BUF_A, r_id, r, \
- QCOM_RPM_KEY_SOFTWARE_ENABLE)
+ QCOM_RPM_KEY_SOFTWARE_ENABLE, 0)
#define DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(_name, r_id, r) \
DEFINE_CLK_SMD_RPM_XO_BUFFER(_name, r_id, r); \
--
2.40.1
