[PATCH v6 04/13] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add input and output ports

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add a ports declaration which is optional containing two port@
declarations.

port@0 to receive an orientation-switch message from the Type-C port or
redriver

port@1 to subsequently transmit the orientation-switch on once the PHY has
finished doing its orientation turn-around.

If ports is declared the input port port@0 is mandatory but the output
port@1 is optional.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
 .../phy/qcom,sc7180-qmp-usb3-dp-phy.yaml      | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
index d307343388888..c370b9cd58c2e 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
@@ -65,6 +65,25 @@ properties:
     description: Flag the port as possible handler of orientation switching
     type: boolean
 
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: OF graph bindings that model incoming orientation-switch and
+      outgoing orientation-switch messages. An example of an incoming
+      orientation-switch message might come form a Type-C connector or a USB
+      redriver. An example of an output would be a DisplayPort controller.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Type-C mux orientation-switch input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: PHY orientation-switch output.
+
+    required:
+      - port@0
+
   resets:
     items:
       - description: reset of phy block.
@@ -279,4 +298,23 @@ examples:
             #clock-cells = <1>;
             #phy-cells = <0>;
         };
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                qmpphy_typec_mux_in: endpoint {
+                    remote-endpoint = <&pmic_typec_mux_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                qmpphy_typec_mux_out: endpoint {
+                    remote-endpoint = <&dp_typec_mux_in>;
+                };
+            };
+        };
     };
-- 
2.39.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux