Re: [PATCH v4 02/22] drm/msm/dpu: Remove TE2 block and feature from DPU >= 5.0.0 hardware

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27/04/2023 01:37, Marijn Suijten wrote:
No hardware beyond kona (sm8250, DPU 6.0.0) defines the TE2 PINGPONG
sub-block offset downstream, and according to insiders no DPU >= 5.0.0
hardware has support for it either.  Especially since neither downstream
nor upstream utilize these registers in any way, remove the erroneous
specification from SM8150, SC8180X, SM8250, SC7180, SM8350, SC8280XP and
SM8450 to prevent confusion.

Note that downstream enables the PPSPLIT (split-FIFO) topology (single
LM for 2 PP and 2 INTF) based on the presence of a TE2 block.

Fixes: 386fced3f76f ("drm/msm/dpu: add SM8150 to hw catalog")
Fixes: 7bdc0c4b8126 ("msm:disp:dpu1: add support for display for SC7180 target")
Fixes: 0e91bcbb0016 ("drm/msm/dpu: Add SM8350 to hw catalog")
Fixes: 4a352c2fc15a ("drm/msm/dpu: Introduce SC8280XP")
Fixes: 100d7ef6995d ("drm/msm/dpu: add support for SM8450")
Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

---
  .../gpu/drm/msm/disp/dpu1/catalog/dpu_5_0_sm8150.h |  4 ++--
  .../drm/msm/disp/dpu1/catalog/dpu_5_1_sc8180x.h    |  4 ++--
  .../gpu/drm/msm/disp/dpu1/catalog/dpu_6_0_sm8250.h |  4 ++--
  .../gpu/drm/msm/disp/dpu1/catalog/dpu_6_2_sc7180.h |  4 ++--
  .../gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h |  4 ++--
  .../drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h   | 24 +++++++++++-----------
  .../gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h |  4 ++--
7 files changed, 24 insertions(+), 24 deletions(-)--
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux