On Mon, Apr 24, 2023 at 08:40:04PM -0700, Bjorn Andersson wrote:
> The QMP combo phy can be connected to a TCPM, a USB controller and a
> DisplayPort controller for handling USB Type-C orientation switching
> and propagating HPD signals.
>
> Extend the binding to allow these connections to be described.
>
> Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> ---
> .../phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml | 51 +++++++++++++++++++
> 1 file changed, 51 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
> index 3cd5fc3e8fab..c037ac90ce7f 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
> @@ -60,6 +60,26 @@ properties:
> description:
> See include/dt-bindings/dt-bindings/phy/phy-qcom-qmp.h
>
> + orientation-switch:
> + description:
> + Flag the PHY as possible handler of USB Type-C orientation switching
> + type: boolean
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> + properties:
> + port@0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: Output endpoint of the PHY
> +
> + port@1:
> + $ref: /schemas/graph.yaml#/$defs/port-base
'port-base' means you have extra properties to add. Where are they? It
also needs 'unevaluatedProperties: false'.
> + description: Incoming endpoint from the USB controller
> +
> + port@2:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + description: Incoming endpoint from the DisplayPort controller
> +
> required:
> - compatible
> - reg
> @@ -98,6 +118,37 @@ examples:
> vdda-phy-supply = <&vreg_l9d>;
> vdda-pll-supply = <&vreg_l4d>;
>
> + orientation-switch;
> +
> #clock-cells = <1>;
> #phy-cells = <1>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + endpoint {
> + remote-endpoint = <&typec_connector_ss>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + endpoint {
> + remote-endpoint = <&dwc3_ss_out>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + endpoint {
> + remote-endpoint = <&mdss_dp_out>;
> + };
> + };
> + };
> };
> --
> 2.39.2
>
