Re: [PATCH v2 3/3] drm/msm/dpu: Pass catalog pointers directly from RM instead of IDs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 4/25/2023 7:26 AM, Dmitry Baryshkov wrote:
On Tue, 25 Apr 2023 at 11:55, Marijn Suijten
<marijn.suijten@xxxxxxxxxxxxxx> wrote:

On 2023-04-25 10:54:47, Dmitry Baryshkov wrote:
On 25/04/2023 10:16, Marijn Suijten wrote:
On 2023-04-24 16:23:17, Abhinav Kumar wrote:


On 4/24/2023 3:54 PM, Dmitry Baryshkov wrote:
On Tue, 25 Apr 2023 at 01:03, Marijn Suijten
<marijn.suijten@xxxxxxxxxxxxxx> wrote:

On 2023-04-21 16:25:15, Abhinav Kumar wrote:


On 4/21/2023 1:53 PM, Marijn Suijten wrote:
The Resource Manager already iterates over all available blocks from the
catalog, only to pass their ID to a dpu_hw_xxx_init() function which
uses an _xxx_offset() helper to search for and find the exact same
catalog pointer again to initialize the block with, fallible error
handling and all.

Instead, pass const pointers to the catalog entries directly to these
_init functions and drop the for loops entirely, saving on both
readability complexity and unnecessary cycles at boot.

Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

Overall, a nice cleanup!

One comment below.

---
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c        | 37 +++++----------------
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h        | 14 ++++----
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.c        | 32 +++---------------
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h        | 11 +++----
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.c       | 38 ++++-----------------
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h       | 12 +++----
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h |  2 +-
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c       | 40 ++++++-----------------
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h       | 12 +++----
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.c         | 38 ++++-----------------
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h         | 10 +++---
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_merge3d.c    | 33 +++----------------
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_merge3d.h    | 14 ++++----
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.c   | 33 +++----------------
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h   | 14 ++++----
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c       | 39 ++++------------------
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h       | 12 +++----
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.c       | 33 +++----------------
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h       | 11 +++----
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c         | 33 ++++---------------
     drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h         | 11 +++----
     drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c           | 17 +++++-----
     drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c            | 18 +++++-----
     23 files changed, 139 insertions(+), 375 deletions(-)


<snipped>

-struct dpu_hw_intf *dpu_hw_intf_init(enum dpu_intf idx,
-           void __iomem *addr,
-           const struct dpu_mdss_cfg *m)
+struct dpu_hw_intf *dpu_hw_intf_init(const struct dpu_intf_cfg *cfg,
+           void __iomem *addr)
     {
       struct dpu_hw_intf *c;
-   const struct dpu_intf_cfg *cfg;
+
+   if (cfg->type == INTF_NONE) {
+           pr_err("Cannot create interface hw object for INTF_NONE type\n");
+           return ERR_PTR(-EINVAL);
+   }

The caller of dpu_hw_intf_init which is the RM already has protection
for INTF_NONE, see below

            for (i = 0; i < cat->intf_count; i++) {
                    struct dpu_hw_intf *hw;
                    const struct dpu_intf_cfg *intf = &cat->intf[i];

                    if (intf->type == INTF_NONE) {
                            DPU_DEBUG("skip intf %d with type none\n", i);
                            continue;
                    }
                    if (intf->id < INTF_0 || intf->id >= INTF_MAX) {
                            DPU_ERROR("skip intf %d with invalid id\n",
intf->id);
                            continue;
                    }
                    hw = dpu_hw_intf_init(intf->id, mmio, cat);

So this part can be dropped.

I mainly intended to keep original validation where _intf_offset would
skip INTF_NONE, and error out.  RM init is hence expected to filter out
INTF_NONE instead of running into that `-EINVAL`, which I maintained
here.

If you think there won't be another caller of dpu_hw_intf_init, and that
such validation is hence excessive, I can remove it in a followup v3.

I'd prefer to see the checks at dpu_rm to be dropped.
dpu_hw_intf_init() (and other dpu_hw_foo_init() functions) should be
self-contained. If they can not init HW block (e.g. because the index
is out of the boundaries), they should return an error.


They already do that today because even without this it will call into
_intf_offset() and that will bail out for INTF_NONE.

I feel this is a duplicated check because the caller with the loop needs
to validate the index before passing it to dpu_hw_intf_init() otherwise
the loop will get broken at the first return of the error and rest of
the blocks will also not be initialized.

To both: keep in mind that the range-checks we want to remove from
dpu_rm_init validate the ID (index?) of a block.  This check is for the
*TYPE* of an INTF block, to skip it gracefully if no hardware is mapped
there.  As per the first patch of this series SM6115/QCM2290 only have a
DSI interface which always sits at ID 1, and ID 0 has its TYPE set to
INTF_NONE and is skipped.

Hence we _should_ keep the graceful TYPE check in dpu_rm_init() to skip
calling this function _and assigning it to the rm->hw_intf array_.  But
I can remove the second TYPE check here in dpu_hw_intf_init() if you
prefer.

We can return NULL from dpu_hw_foo_init(), which would mean that the
block was skipped or is not present.

An then replace the `if INTF_NONE continue` logic in dpu_rm_init with a
check for NULL that skips, and a check for IS_ERR` that goes to `fail`?

You can just drop the INTF_NONE in dpu_rm. If dpu_hw_intf_init()
returns NULL, the rest of the code in dpu_rm will work correctly.


The only thing lost will be that the loop in the RM will break at the first instance of NULL so if the loop has valid intf blocks later, those will also not get initialized.

That wont happen today because catalog doesnt have such entries but just wanted to note what gets lost with this change.

Otherwise, I am okay with that.


Should I do that in a new or the same patch for v3?

Note that there's a similar check for the `pingpong` "id" member of
every Layer Mixer.

- Marijn






[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux