Re: [PATCH v1 5/5] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 4/21/2023 4:11 PM, Dmitry Baryshkov wrote:
On 22/04/2023 02:08, Kuogee Hsieh wrote:

On 4/21/2023 3:16 PM, Dmitry Baryshkov wrote:
On 22/04/2023 01:05, Kuogee Hsieh wrote:

On 4/20/2023 5:07 PM, Dmitry Baryshkov wrote:
On 21/04/2023 02:25, Kuogee Hsieh wrote:
From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>

Add DSC 1.2 hardware blocks to the catalog with necessary
sub-block and feature flag information.
Each display compression engine (DCE) contains dual hard
slice DSC encoders so both share same base address but with
its own different sub block address.

Please correct line wrapping. 72-75 is usually the preferred width


Signed-off-by: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
---
  .../gpu/drm/msm/disp/dpu1/catalog/dpu_7_0_sm8350.h  | 19 +++++++++++++++++++   .../gpu/drm/msm/disp/dpu1/catalog/dpu_7_2_sc7280.h  | 11 +++++++++++   .../drm/msm/disp/dpu1/catalog/dpu_8_0_sc8280xp.h    | 21 +++++++++++++++++++++   .../gpu/drm/msm/disp/dpu1/catalog/dpu_8_1_sm8450.h  | 19 +++++++++++++++++++   .../gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h  | 19 +++++++++++++++++++   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c      | 12 ++++++++++--
  6 files changed, 99 insertions(+), 2 deletions(-)



[I commented on sm8550, it applies to all the rest of platforms]

diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
index 9e40303..72a7bcf 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_0_sm8550.h
@@ -165,6 +165,23 @@ static const struct dpu_merge_3d_cfg sm8550_merge_3d[] = {
      MERGE_3D_BLK("merge_3d_3", MERGE_3D_3, 0x66700),
  };
  +static const struct dpu_dsc_sub_blks sm8550_dsc_sblk_0 = {
+    .enc = {.base = 0x100, .len = 0x100},
+    .ctl = {.base = 0xF00, .len = 0x10},
+};
+
+static const struct dpu_dsc_sub_blks sm8550_dsc_sblk_1 = {
+    .enc = {.base = 0x200, .len = 0x100},
+    .ctl = {.base = 0xF80, .len = 0x10},
+};

Please keep sblk in dpu_hw_catalog for now.

+
+static const struct dpu_dsc_cfg sm8550_dsc[] = {
+    DSC_BLK_1_2("dsc_0", DSC_0, 0x80000, 0x100, 0, sm8550_dsc_sblk_0), +    DSC_BLK_1_2("dsc_0", DSC_1, 0x80000, 0x100, 0, sm8550_dsc_sblk_1),

Is there a reason why index in "dsc_N" doesn't match the DSC_n which comes next to it?

usually each DCE (display compression engine) contains two hard slice encoders.

DSC_0 and DSC_1 (index) is belong to dsc_0.

If there are two DCE, then DSC_2 and DSC_3 belong to dsc_1

Ah, I see now. So, the block register space is the following:
DCEi ->
  common
  dsc0_enc
  dsc1_enc
  dsc0_ctl
  dsc1_ctl

Instead of declaring a single DCE unit with two DSC blocks, we declare two distinct DSC blocks. This raises a question, how independent are these two parts of a single DCE block? For example, can we use them to perform compression with different parameters? Or use one of them for the DP DSC and another one for DSI DSC? Can we have the following configuration:

DSC_0 => DP DSC
DSC_1, DSC_2 => DSI DSC in DSC_MERGE topology?

no, For merge mode you have to use same DCE, such as DSC_2 and DSC3 (pair)

Ok, this is for the merge mode. So the dpu_rm should be extended to allocate them in pairs if merge mode is requested.

What about using DSC_0 for DP and DSC_1 for DSI? Is it possible?

I never do that, but i think it should  works since they can work independently.







+    DSC_BLK_1_2("dsc_1", DSC_2, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), sm8550_dsc_sblk_0), +    DSC_BLK_1_2("dsc_1", DSC_3, 0x81000, 0x100, BIT(DPU_DSC_NATIVE_422_EN), sm8550_dsc_sblk_1),
+};
+
  static const struct dpu_intf_cfg sm8550_intf[] = {
      INTF_BLK("intf_0", INTF_0, 0x34000, 0x280, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
      /* TODO TE sub-blocks for intf1 & intf2 */
@@ -218,6 +235,8 @@ const struct dpu_mdss_cfg dpu_sm8550_cfg = {
      .dspp = sm8550_dspp,
      .pingpong_count = ARRAY_SIZE(sm8550_pp),
      .pingpong = sm8550_pp,
+    .dsc = sm8550_dsc,
+    .dsc_count = ARRAY_SIZE(sm8550_dsc),
      .merge_3d_count = ARRAY_SIZE(sm8550_merge_3d),
      .merge_3d = sm8550_merge_3d,
      .intf_count = ARRAY_SIZE(sm8550_intf),
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 03f162a..be08158 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -1,6 +1,6 @@
  // SPDX-License-Identifier: GPL-2.0-only
  /* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. - * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2022-2023, Qualcomm Innovation Center, Inc. All rights reserved.
   */
    #define pr_fmt(fmt)    "[drm:%s:%d] " fmt, __func__, __LINE__
@@ -540,7 +540,15 @@ static const struct dpu_pingpong_sub_blks sc7280_pp_sblk = {
      {\
      .name = _name, .id = _id, \
      .base = _base, .len = 0x140, \
-    .features = _features, \
+    .features = BIT(DPU_DSC_HW_REV_1_1) | _features, \
+    }
+
+#define DSC_BLK_1_2(_name, _id, _base, _len, _features, _sblk) \
+    {\
+    .name = _name, .id = _id, \
+    .base = _base, .len = _len, \
+    .features = BIT(DPU_DSC_HW_REV_1_2) | _features, \
+    .sblk = &_sblk, \
      }
/*************************************************************






[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux