Re: [PATCH] dt-bindings: thermal: qcom-tsens: correct unit address

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 20, 2023 at 12:54 PM Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> Match unit-address to first reg entry.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

Acked-by: Amit Kucheria <amitk@xxxxxxxxxx>

> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index b6452ed78802..d9aa54c11663 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -328,7 +328,7 @@ examples:
>    - |
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
>      // Example 1 (new calbiration data: for pre v1 IP):
> -    thermal-sensor@900000 {
> +    thermal-sensor@4a9000 {
>          compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
>          reg = <0x4a9000 0x1000>, /* TM */
>                <0x4a8000 0x1000>; /* SROT */
> @@ -358,7 +358,7 @@ examples:
>    - |
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
>      // Example 1 (legacy: for pre v1 IP):
> -    tsens1: thermal-sensor@900000 {
> +    tsens1: thermal-sensor@4a9000 {
>             compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
>             reg = <0x4a9000 0x1000>, /* TM */
>                   <0x4a8000 0x1000>; /* SROT */
> --
> 2.34.1
>




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux