Le jeu. 20 avr. 2023 à 01:10, Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> a écrit :
>
> On 19/04/2023 17:41, Arnaud Vrac wrote:
> > Now that cursor sspp blocks can be used for cursor planes, enable them
> > on msm8998. The dma sspp blocks that were assigned to cursor planes can
> > now be used for overlay planes instead.
>
> While the change is correct, there is more about it. Composers, using
> universal planes, will see this plane too. They have no obligations to
> use it only for the cursor. At the minimum could you please extend the
> plane_atomic_check to check for the plane dimensions for the CURSOR pipes?
Hum, I had assumed the generic atomic checks would already do this,
but it's not the case. I'll add the check when the pipe is of type
SSPP_CURSOR in another patch coming before, thanks.
>
> For this change:
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
>
> >
> > Signed-off-by: Arnaud Vrac <avrac@xxxxxxxxxx>
> > ---
> > .../drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h | 8 +++--
> > drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 34 ++++++++++++++++++++++
> > 2 files changed, 40 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
> > index b07e8a9941f79..7de393b0f91d7 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_3_0_msm8998.h
> > @@ -90,10 +90,14 @@ static const struct dpu_sspp_cfg msm8998_sspp[] = {
> > sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
> > SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, 0x1ac, DMA_MSM8998_MASK,
> > sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
> > - SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, 0x1ac, DMA_CURSOR_MSM8998_MASK,
> > + SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, 0x1ac, DMA_MSM8998_MASK,
> > sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA2),
> > - SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, 0x1ac, DMA_CURSOR_MSM8998_MASK,
> > + SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, 0x1ac, DMA_MSM8998_MASK,
> > sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA3),
> > + SSPP_BLK("sspp_12", SSPP_CURSOR0, 0x34000, 0x1ac, DMA_CURSOR_MSM8998_MASK,
> > + msm8998_cursor_sblk_0, 2, SSPP_TYPE_CURSOR, DPU_CLK_CTRL_CURSOR0),
> > + SSPP_BLK("sspp_13", SSPP_CURSOR1, 0x36000, 0x1ac, DMA_CURSOR_MSM8998_MASK,
> > + msm8998_cursor_sblk_1, 10, SSPP_TYPE_CURSOR, DPU_CLK_CTRL_CURSOR1),
> > };
> >
> > static const struct dpu_lm_cfg msm8998_lm[] = {
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > index 8d5d782a43398..f34fa704936bc 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > @@ -242,6 +242,22 @@ static const uint32_t wb2_formats[] = {
> > DRM_FORMAT_XBGR4444,
> > };
> >
> > +static const uint32_t cursor_formats[] = {
> > + DRM_FORMAT_ARGB8888,
> > + DRM_FORMAT_ABGR8888,
> > + DRM_FORMAT_RGBA8888,
> > + DRM_FORMAT_BGRA8888,
> > + DRM_FORMAT_XRGB8888,
> > + DRM_FORMAT_ARGB1555,
> > + DRM_FORMAT_ABGR1555,
> > + DRM_FORMAT_RGBA5551,
> > + DRM_FORMAT_BGRA5551,
> > + DRM_FORMAT_ARGB4444,
> > + DRM_FORMAT_ABGR4444,
> > + DRM_FORMAT_RGBA4444,
> > + DRM_FORMAT_BGRA4444,
> > +};
> > +
> > /*************************************************************
> > * SSPP sub blocks config
> > *************************************************************/
> > @@ -300,6 +316,19 @@ static const uint32_t wb2_formats[] = {
> > .virt_num_formats = ARRAY_SIZE(plane_formats), \
> > }
> >
> > +#define _CURSOR_SBLK(num) \
> > + { \
> > + .maxdwnscale = SSPP_UNITY_SCALE, \
> > + .maxupscale = SSPP_UNITY_SCALE, \
> > + .smart_dma_priority = 0, \
> > + .src_blk = {.name = STRCAT("sspp_src_", num), \
> > + .id = DPU_SSPP_SRC, .base = 0x00, .len = 0x150,}, \
> > + .format_list = cursor_formats, \
> > + .num_formats = ARRAY_SIZE(cursor_formats), \
> > + .virt_format_list = cursor_formats, \
> > + .virt_num_formats = ARRAY_SIZE(cursor_formats), \
> > + }
> > +
> > static const struct dpu_sspp_sub_blks msm8998_vig_sblk_0 =
> > _VIG_SBLK("0", 0, DPU_SSPP_SCALER_QSEED3);
> > static const struct dpu_sspp_sub_blks msm8998_vig_sblk_1 =
> > @@ -309,6 +338,11 @@ static const struct dpu_sspp_sub_blks msm8998_vig_sblk_2 =
> > static const struct dpu_sspp_sub_blks msm8998_vig_sblk_3 =
> > _VIG_SBLK("3", 0, DPU_SSPP_SCALER_QSEED3);
> >
> > +static const struct dpu_sspp_sub_blks msm8998_cursor_sblk_0 =
> > + _CURSOR_SBLK("12");
> > +static const struct dpu_sspp_sub_blks msm8998_cursor_sblk_1 =
> > + _CURSOR_SBLK("13");
> > +
> > static const struct dpu_rotation_cfg dpu_rot_sc7280_cfg_v2 = {
> > .rot_maxheight = 1088,
> > .rot_num_formats = ARRAY_SIZE(rotation_v2_formats),
> >
>
> --
> With best wishes
> Dmitry
>
