[PATCH 4/4] arm64: dts: qcom: msm8998: add hdmi cec pinctrl nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



HDMI is not enabled yet on msm8998 so the pinctrl nodes are not
used.

Signed-off-by: Arnaud Vrac <avrac@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index b150437a83558..fb4aa376ef117 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1312,6 +1312,20 @@ blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
 				drive-strength = <2>;
 				bias-pull-up;
 			};
+
+			hdmi_cec_default: hdmi-cec-default-state {
+				pins = "gpio31";
+				function = "hdmi_cec";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			hdmi_cec_sleep: hdmi-cec-sleep-state {
+				pins = "gpio31";
+				function = "hdmi_cec";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
 		};
 
 		remoteproc_mss: remoteproc@4080000 {

-- 
2.40.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux