On 16.04.2023 16:20, Manivannan Sadhasivam wrote:
> On Fri, Apr 14, 2023 at 01:37:18PM +0200, Konrad Dybcio wrote:
>> Introduce a driver to query and expose detailed, per-subsystem (as opposed
>> to the existing qcom_stats driver which exposes SoC-wide data) about low
>> power mode states of a given RPM master. That includes the APSS (ARM),
>> MPSS (modem) and other remote cores, depending on the platform
>> configuration.
>>
>> This is a vastly cleaned up and restructured version of a similar
>> driver found in msm-5.4.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>> ---
>> drivers/soc/qcom/Kconfig | 11 +++
>> drivers/soc/qcom/Makefile | 1 +
>> drivers/soc/qcom/rpm_master_stats.c | 160 ++++++++++++++++++++++++++++++++++++
>> 3 files changed, 172 insertions(+)
>>
>> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
>> index a491718f8064..e597799e8121 100644
>> --- a/drivers/soc/qcom/Kconfig
>> +++ b/drivers/soc/qcom/Kconfig
>> @@ -135,6 +135,17 @@ config QCOM_RMTFS_MEM
>>
>> Say y here if you intend to boot the modem remoteproc.
>>
>> +config QCOM_RPM_MASTER_STATS
>> + tristate "Qualcomm RPM Master stats"
>> + depends on ARCH_QCOM || COMPILE_TEST
>> + help
>> + The RPM Master sleep stats driver provides detailed per-subsystem
>> + sleep/wake data, read from the RPM message RAM. It can be used to
>> + assess whether all the low-power modes available are entered as
>> + expected or to check which part of the SoC prevents it from sleeping.
>> +
>> + Say y here if you intend to debug or monitor platform sleep.
>> +
>> config QCOM_RPMH
>> tristate "Qualcomm RPM-Hardened (RPMH) Communication"
>> depends on ARCH_QCOM || COMPILE_TEST
>> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
>> index 0f43a88b4894..7349371fdea1 100644
>> --- a/drivers/soc/qcom/Makefile
>> +++ b/drivers/soc/qcom/Makefile
>> @@ -14,6 +14,7 @@ obj-$(CONFIG_QCOM_QMI_HELPERS) += qmi_helpers.o
>> qmi_helpers-y += qmi_encdec.o qmi_interface.o
>> obj-$(CONFIG_QCOM_RAMP_CTRL) += ramp_controller.o
>> obj-$(CONFIG_QCOM_RMTFS_MEM) += rmtfs_mem.o
>> +obj-$(CONFIG_QCOM_RPM_MASTER_STATS) += rpm_master_stats.o
>> obj-$(CONFIG_QCOM_RPMH) += qcom_rpmh.o
>> qcom_rpmh-y += rpmh-rsc.o
>> qcom_rpmh-y += rpmh.o
>> diff --git a/drivers/soc/qcom/rpm_master_stats.c b/drivers/soc/qcom/rpm_master_stats.c
>> new file mode 100644
>> index 000000000000..73080c92bf89
>> --- /dev/null
>> +++ b/drivers/soc/qcom/rpm_master_stats.c
>> @@ -0,0 +1,160 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2012-2020, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2023, Linaro Limited
>> + *
>> + * This driver supports what is known as "Master Stats v2", which seems to be
>> + * the only version which has ever shipped, all the way from 2013 to 2023.
>
> It'd better to mention "Qualcomm downstream" in the somewhere above comment to
> make it clear for users.
Ack
>
>> + */
>> +
>> +#include <linux/debugfs.h>
>> +#include <linux/io.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/platform_device.h>
>> +
>> +struct master_stats_data {
>> + void __iomem *base;
>> + const char *label;
>> +};
>> +
>> +struct rpm_master_stats {
>> + uint32_t active_cores;
>> + uint32_t num_shutdowns;
>> + uint64_t shutdown_req;
>> + uint64_t wakeup_idx;
>> + uint64_t bringup_req;
>> + uint64_t bringup_ack;
>> + uint32_t wakeup_reason; /* 0 = "rude wakeup", 1 = scheduled wakeup */
>> + uint32_t last_sleep_trans_dur;
>> + uint32_t last_wake_trans_dur;
>> +
>> + /* Per-subsystem (*not necessarily* SoC-wide) XO shutdown stats */
>> + uint32_t xo_count;
>> + uint64_t xo_last_enter;
>> + uint64_t last_exit;
>> + uint64_t xo_total_dur;
>
> Why can't you use u64, u32?
Brain derp!
>
> Also, sort these members as below:
>
> u64
> u32
No, it's the way this data is structured in the
memory and we copy it as a whole.
>
>> +};
>> +
>> +static int master_stats_show(struct seq_file *s, void *unused)
>> +{
>> + struct master_stats_data *d = s->private;
>> + struct rpm_master_stats stat;
>> +
>> + memcpy_fromio(&stat, d->base, sizeof(stat));
>> +
>> + seq_printf(s, "%s:\n", d->label);
>> +
>> + seq_printf(s, "\tLast shutdown @ %llu\n", stat.shutdown_req);
>> + seq_printf(s, "\tLast bringup req @ %llu\n", stat.bringup_req);
>> + seq_printf(s, "\tLast bringup ack @ %llu\n", stat.bringup_ack);
>> + seq_printf(s, "\tLast wakeup idx: %llu\n", stat.wakeup_idx);
>> + seq_printf(s, "\tLast XO shutdown enter @ %llu\n", stat.xo_last_enter);
>> + seq_printf(s, "\tLast XO shutdown exit @ %llu\n", stat.last_exit);
>> + seq_printf(s, "\tXO total duration: %llu\n", stat.xo_total_dur);
>> + seq_printf(s, "\tLast sleep transition duration: %u\n", stat.last_sleep_trans_dur);
>> + seq_printf(s, "\tLast wake transition duration: %u\n", stat.last_wake_trans_dur);
>> + seq_printf(s, "\tXO shutdown count: %u\n", stat.xo_count);
>> + seq_printf(s, "\tWakeup reason: 0x%x\n", stat.wakeup_reason);
>> + seq_printf(s, "\tShutdown count: %u\n", stat.num_shutdowns);
>> + seq_printf(s, "\tActive cores bitmask: 0x%x\n", stat.active_cores);
>> +
>> + return 0;
>> +}
>> +DEFINE_SHOW_ATTRIBUTE(master_stats);
>> +
>> +static int master_stats_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct device_node *msgram_np;
>> + struct master_stats_data *d;
>
> "d" is not a good choice for a local variable (might be OK above but definitely
> not here)
Sure, I can change it.
>
>> + struct dentry *dent, *root;
>> + struct resource res;
>> + int count, i, ret;
>> +
>> + count = of_property_count_strings(dev->of_node, "qcom,master-names");
>> + if (count < 0)
>> + return count;
>> +
>> + d = devm_kzalloc(dev, count * sizeof(*d), GFP_KERNEL);
>> + if (!d)
>> + return -ENOMEM;
>> +
>> + root = debugfs_create_dir("rpm_master_stats", NULL);
>
> It's better to use "qcom_rpm_master_stats".
Ack
>
>> + platform_set_drvdata(pdev, root);
>> +
>> + for (i = 0; i < count; i++) {
>> + msgram_np = of_parse_phandle(dev->of_node, "qcom,rpm-msg-ram", i);
>> + if (!msgram_np) {
>> + debugfs_remove_recursive(root);
>> + return dev_err_probe(dev, -EINVAL,
>
> -ENODEV
Ack
>
>> + "Couldn't parse MSG RAM phandle idx %d", i);
>> + }
>> +
>> + /*
>> + * Purposefully skip devm_platform helpers as we're using a
>> + * shared resource.
>> + */
>> + ret = of_address_to_resource(msgram_np, 0, &res);
>
> Missing of_node_put() here due to of_parse_phandle().
Ack
>
>> + if (ret < 0) {
>> + debugfs_remove_recursive(root);
>> + return ret;
>> + }
>> +
>> + d[i].base = devm_ioremap(dev, res.start, resource_size(&res));
>> + if (IS_ERR(d[i].base)) {
>> + debugfs_remove_recursive(root);
>> + return dev_err_probe(dev, -EINVAL,
>> + "Could not map the MSG RAM slice idx %d!\n", i);
>> + }
>> +
>> + ret = of_property_read_string_index(dev->of_node, "qcom,master-names", i,
>> + &d[i].label);
>> + if (ret < 0) {
>> + debugfs_remove_recursive(root);
>> + return dev_err_probe(dev, ret,
>> + "Could not read name idx %d!\n", i);
>> + }
>> +
>> + /*
>> + * Generally it's not advised to fail on debugfs errors, but this
>> + * driver's only job is exposing data therein.
>> + */
>> + dent = debugfs_create_file(d[i].label, 0444, root,
>> + &d[i], &master_stats_fops);
>> + if (!dent) {
>
> Don't check for NULL, instead use IS_ERR() if you really care about error
> checking here.
"This function will return a pointer to a dentry if
it succeeds. This pointer must be passed to the
debugfs_remove function when the file is to be removed
(no automatic cleanup happens if your module is unloaded,
you are responsible here.) If an error occurs, NULL will
be returned."
>
>> + debugfs_remove_recursive(root);
>> + return -EINVAL;
>> + }
>> + }
>> +
>> + device_set_pm_not_required(dev);
>> +
>> + return 0;
>> +}
>> +
>> +static void master_stats_remove(struct platform_device *pdev)
>> +{
>> + struct dentry *root = platform_get_drvdata(pdev);
>> +
>> + debugfs_remove_recursive(root);
>> +}
>> +
>> +static const struct of_device_id rpm_master_table[] = {
>> + { .compatible = "qcom,rpm-master-stats" },
>> + { },
>> +};
>> +
>> +static struct platform_driver master_stats_driver = {
>> + .probe = master_stats_probe,
>> + .remove_new = master_stats_remove,
>> + .driver = {
>> + .name = "rpm_master_stats",
>> + .of_match_table = rpm_master_table,
>> + },
>> +};
>> +module_platform_driver(master_stats_driver);
>> +
>> +MODULE_DESCRIPTION("RPM Master Statistics driver");
>
> Qualcomm RPM Master Statistics driver
Ack
Konrad
>
> - Mani
>
>> +MODULE_LICENSE("GPL");
>>
>> --
>> 2.40.0
>>
>
