Re: [PATCH V1 2/3] drivers: misc: dcc: Add driver support for Data Capture and Compare unit(DCC)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 4/17/2023 11:47 AM, Greg Kroah-Hartman wrote:
On Mon, Apr 17, 2023 at 11:31:46AM +0530, Souradeep Chowdhury wrote:


On 4/15/2023 11:09 AM, Greg Kroah-Hartman wrote:
On Fri, Apr 14, 2023 at 07:29:12PM +0530, Souradeep Chowdhury wrote:
The DCC is a DMA Engine designed to capture and store data
during system crash or software triggers. The DCC operates
based on user inputs via the debugfs interface. The user gives
addresses as inputs and these addresses are stored in the
dcc sram. In case of a system crash or a manual software
trigger by the user through the debugfs interface,
the dcc captures and stores the values at these addresses.
This patch contains the driver which has all the methods
pertaining to the debugfs interface, auxiliary functions to
support all the four fundamental operations of dcc namely
read, write, read/modify/write and loop. The probe method
here instantiates all the resources necessary for dcc to
operate mainly the dedicated dcc sram where it stores the
values. The DCC driver can be used for debugging purposes
without going for a reboot since it can perform software
triggers as well based on user inputs.

You have 72 columns, why not use them all please?

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015-2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.

It is now 2023 :)

Ack





+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#define STATUS_READY_TIMEOUT		5000  /* microseconds */
+
+#define DCC_SRAM_NODE "dcc_sram"

You only use this once, why is a #define needed?

This is as per the comment on version 1 of the patch series on DCC

https://lore.kernel.org/linux-arm-kernel/YElUCaBUOx7hEuIh@xxxxxxxxxxx/

"kzalloc + strlcpy can be replaced by kstrdup(), but that said...all this
does seems to be to copy a const string to the heap and lugging it
around. Use a define instead."

But as you are not doing any of that here, just using the string in the
one place it is needed is the same thing :)

Ack


+static void dcc_create_debug_dir(struct dcc_drvdata *drvdata)
+{
+	int i;
+	char list_num[10];
+	struct dentry *list;
+	struct device *dev = drvdata->dev;
+
+	drvdata->dbg_dir = debugfs_create_dir(dev_name(dev), NULL);

You are creating a directory at the root of debugfs with just your
device name?  While that will work, that feels very odd.  Please use a
subdirectory.

This is as per the comment on v17 of the patch series on DCC

https://lore.kernel.org/linux-arm-kernel/6693993c-bd81-c974-a903-52a62bfec606@xxxxxxxx/

"You never remove this dcc_dbg directory.  Why not?

And since you don't, dcc_dbg could just be a local
variable here rather than being a global.  But it
seems to me this is the root directory you want to
remove when you're done."

But that's not the issue.  The issue is that you are putting into
/sys/kernel/debug/ a flat namespace of all of your devices.  Is that
really what you want?  If so, why do you think this will never conflict
with any other device in the system?

Since we are going by the dev_name here which also contains the address
as per the example in the yaml binding, this will not conflict with other dev_names in the system.


+	if (IS_ERR(drvdata->dbg_dir)) {
+		pr_err("can't create debugfs dir\n");

There is no need to ever check the return value of a debugfs call.

Nor do you really ever even need to save off the dentry here, just look
it up when you need to remove it.

Ack


+		return;
+	}
+
+	for (i = 0; i <= drvdata->nr_link_list; i++) {
+		sprintf(list_num, "%d", i);
+		list = debugfs_create_dir(list_num, drvdata->dbg_dir);
+		debugfs_create_file("enable", 0600, list, drvdata, &enable_fops);
+		debugfs_create_file("config", 0600, list, drvdata, &config_fops);
+	}
+
+	debugfs_create_file("trigger", 0200, drvdata->dbg_dir, drvdata, &trigger_fops);
+	debugfs_create_file("ready", 0400, drvdata->dbg_dir, drvdata, &ready_fops);
+	debugfs_create_file("config_reset", 0200, drvdata->dbg_dir,
+			    drvdata, &config_reset_fops);

This really looks like you are using debugfs to control the device, not
just for debugging information.  How are you going to be able to use the
device in a system that has debugfs disabled?

As per upstream discussions it was decided that debugfs will be a suitable
interface for DCC. More on this in the following link:-

https://lore.kernel.org/linux-arm-kernel/20221228172825.r32vpphbdulaldvv@xxxxxxxxxxx/

debugfs is not a suitable interface for anything that is "real" as
that's not what it is there for.  Most systems disable debugfs entirely
(i.e. Android), or prevent any normal user from accessing it, so this
api you are creating will not be able to be used by anyone.

debugfs is for debugging, not for anything that the system functionality
relies on to work properly.

DCC is a debugging hardware which stores the values of the configured register address on a system crash on it's dedicated sram. These register addresses are configured by the user through the debugfs interface. Also on the platforms where debugfs is disabled there is an alternative of using bootconfig suggested to configure the register values during boot-time. There is an ongoing patch series for that as follows:-

https://lore.kernel.org/linux-arm-kernel/cover.1675054375.git.quic_schowdhu@xxxxxxxxxxx/T/


Also, that was a v21 of the patch series, why did the numbering start
over here at v1?

Ack. It was decided prior to merge this driver under drivers/soc/qcom but after discussions it was concluded that drivers/misc will be the suitable home for this driver. Will post subsequent versions as a continuation of the previous series for convenience.



thanks,

greg k-h



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux