Re: [PATCH V3 8/9] arm64: dts: Add ipq5018 SoC and rdp432-c2 board support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 14/04/2023 12:29, Sricharan Ramabadhran wrote:
> Add initial device tree support for the Qualcomm IPQ5018 SoC and
> rdp432-c2 board.
> 
> Co-developed-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
> Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
> Co-developed-by: Gokul Sriram Palanisamy <quic_gokulsri@xxxxxxxxxxx>
> Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@xxxxxxxxxxx>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> ---
>  [v3] Fixed all review comments and DTS schema warnings
> 
>  arch/arm64/boot/dts/qcom/Makefile              |   1 +

You have some failures to fix. Difficult to say how much because your
patchset breaks other bindings, so validation aborted. For sure your
cache misses properties:

ipq5018-rdp432-c2.dtb: l2-cache: 'cache-unified' is a required property

Be sure that your DTS is clean and comes with no new warnings. If you
need help with them, get in touch. If your DTS is correct, but errors
come from other schema, try my pending branch:
https://github.com/krzk/linux/commits/pending/dt-bindings-qcom-new-and-fixes-for-warnings-linux-next

Best regards,
Krzysztof




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux