[PATCH v3 5/5] arm64: dts: qcom: sdm845-shift-axolotl: update focaltech touchscreen properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The touchscreen nodes were added before the driver patches were merged.
Update the focaltech touchscreen properties to match with the upstreamed
focaltech driver. Also, the touchscreen used is in axolotl is fts5452
and not fts8719.

Signed-off-by: Joel Selvaraj <joelselvaraj.oss@xxxxxxxxx>
---
 .../boot/dts/qcom/sdm845-shift-axolotl.dts     | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index b54e304abf71..70286e53e000 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -474,23 +474,21 @@ &i2c5 {
 	status = "okay";
 
 	touchscreen@38 {
-		compatible = "focaltech,fts8719";
+		compatible = "focaltech,fts5452";
 		reg = <0x38>;
-		wakeup-source;
-		interrupt-parent = <&tlmm>;
-		interrupts = <125 0x2>;
-		vdd-supply = <&vreg_l28a_3p0>;
-		vcc-i2c-supply = <&vreg_l14a_1p88>;
 
-		pinctrl-names = "default", "suspend";
+		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+
+		avdd-supply = <&vreg_l28a_3p0>;
+		vddio-supply = <&vreg_l14a_1p88>;
+
 		pinctrl-0 = <&ts_int_active &ts_reset_active>;
 		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
+		pinctrl-names = "default", "suspend";
 
-		reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
-		irq-gpio = <&tlmm 125 GPIO_TRANSITORY>;
 		touchscreen-size-x = <1080>;
 		touchscreen-size-y = <2160>;
-		focaltech,max-touch-number = <5>;
 	};
 };
 
-- 
2.40.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux