Re: [PATCH V12 3/4] arm64: dts: qcom: Add support for ipq9574 SoC and RDP433 variant

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 4/13/2023 2:16 AM, Konrad Dybcio wrote:


On 10.04.2023 15:59, Devi Priya wrote:
Add initial device tree support for Qualcomm IPQ9574 SoC and
Reference Design Platform(RDP) 433 which is based on IPQ9574
family of SoCs

Co-developed-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
Signed-off-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
Co-developed-by: Poovendhan Selvaraj <quic_poovendh@xxxxxxxxxxx>
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@xxxxxxxxxxx>
Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>
---

+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
this is equal to:

ranges;

Konrad, on updating (ranges = <0 0 0 0xffffffff>; --> ranges;)
we see the below warnings:
arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format):
/soc@0:ranges: empty "ranges" property but its #address-cells (1)
differs from / (2)
arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format): /soc@0:ranges: empty "ranges" property but its #size-cells (1) differs
from / (2)

Looks like, empty ranges property isn't supported if the parent and
child address spaces are non-identical.
Would you suggest to retain the ranges as such?
(ranges = <0 0 0 0xffffffff>;)

Thanks,
Devi Priya

Could you fix that up when applying, Bjorn, should there be
no other issues?

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Thank you!
Konrad

+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,ipq9574-tlmm";
+			reg = <0x01000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 65>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			uart2_pins: uart2-state {
+				pins = "gpio34", "gpio35";
+				function = "blsp2_uart";
+				drive-strength = <8>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,ipq9574-gcc";
+			reg = <0x01800000 0x80000>;
+			clocks = <&xo_board_clk>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		sdhc_1: mmc@7804000 {
+			compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x07804000 0x1000>, <0x07805000 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board_clk>;
+			clock-names = "iface", "core", "xo";
+			non-removable;
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@78b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b1000 0x200>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			reg = <0x0b000000 0x1000>,  /* GICD */
+			      <0x0b002000 0x2000>,  /* GICC */
+			      <0x0b001000 0x1000>,  /* GICH */
+			      <0x0b004000 0x2000>;  /* GICV */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			ranges = <0 0x0b00c000 0x3000>;
+
+			v2m0: v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00000000 0xffd>;
+				msi-controller;
+			};
+
+			v2m1: v2m@1000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00001000 0xffd>;
+				msi-controller;
+			};
+
+			v2m2: v2m@2000 {
+				compatible = "arm,gic-v2m-frame";
+				reg = <0x00002000 0xffd>;
+				msi-controller;
+			};
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x0b120000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			frame@b120000 {
+				reg = <0x0b121000 0x1000>,
+				      <0x0b122000 0x1000>;
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			frame@b123000 {
+				reg = <0x0b123000 0x1000>;
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				reg = <0x0b124000 0x1000>;
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				reg = <0x0b125000 0x1000>;
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				reg = <0x0b126000 0x1000>;
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				reg = <0x0b127000 0x1000>;
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				reg = <0x0b128000 0x1000>;
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux