Re: [PATCH v2 1/3] arm64: dts: qcom: sa8155p-adp: Make compatible the first property

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>]

On 13.04.2023 21:40, Andrew Halaney wrote:
> As stated at the below link in another review, compatible is always the
> first property.
> 
> Follow suit here to avoid copying incorrectly in the future.
> 
> Link: https://lore.kernel.org/netdev/20230331215804.783439-1-ahalaney@xxxxxxxxxx/T/#ma76b4116bbb9e49ee4bcf699e40935d80965b3f3
> Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
> 
> Changes since v1:
>     * None
> 
>  arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> index 339fea522509..029b23198b3a 100644
> --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> @@ -352,19 +352,18 @@ &ethernet {
>  	max-speed = <1000>;
>  
>  	mdio {
> +		compatible = "snps,dwmac-mdio";
>  		#address-cells = <0x1>;
>  		#size-cells = <0x0>;
>  
> -		compatible = "snps,dwmac-mdio";
> -
>  		/* Micrel KSZ9031RNZ PHY */
>  		rgmii_phy: phy@7 {
> +			compatible = "ethernet-phy-ieee802.3-c22";
>  			reg = <0x7>;
>  
>  			interrupt-parent = <&tlmm>;
>  			interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */
>  			device_type = "ethernet-phy";
> -			compatible = "ethernet-phy-ieee802.3-c22";
>  		};
>  	};
>  };