Re: [net-next PATCH v6 12/16] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Apr 06, 2023 at 09:10:18AM -0500, Rob Herring wrote:
> On Mon, Mar 27, 2023 at 04:10:27PM +0200, Christian Marangi wrote:
> > Add LEDs definition example for qca8k Switch Family to describe how they
> > should be defined for a correct usage.
> > 
> > Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> > ---
> >  .../devicetree/bindings/net/dsa/qca8k.yaml    | 24 +++++++++++++++++++
> >  1 file changed, 24 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> > index 389892592aac..ad354864187a 100644
> > --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> > +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> > @@ -18,6 +18,8 @@ description:
> >    PHY it is connected to. In this config, an internal mdio-bus is registered and
> >    the MDIO master is used for communication. Mixed external and internal
> >    mdio-bus configurations are not supported by the hardware.
> > +  Each phy has at most 3 LEDs connected and can be declared
> > +  using the standard LEDs structure.
> >  
> >  properties:
> >    compatible:
> > @@ -117,6 +119,7 @@ unevaluatedProperties: false
> >  examples:
> >    - |
> >      #include <dt-bindings/gpio/gpio.h>
> > +    #include <dt-bindings/leds/common.h>
> >  
> >      mdio {
> >          #address-cells = <1>;
> > @@ -226,6 +229,27 @@ examples:
> >                      label = "lan1";
> >                      phy-mode = "internal";
> >                      phy-handle = <&internal_phy_port1>;
> > +
> > +                    leds {
> > +                        #address-cells = <1>;
> > +                        #size-cells = <0>;
> > +
> > +                        led@0 {
> > +                            reg = <0>;
> > +                            color = <LED_COLOR_ID_WHITE>;
> > +                            function = LED_FUNCTION_LAN;
> > +                            function-enumerator = <1>;
> > +                            default-state = "keep";
> > +                        };
> > +
> > +                        led@1 {
> > +                            reg = <1>;
> > +                            color = <LED_COLOR_ID_AMBER>;
> > +                            function = LED_FUNCTION_LAN;
> > +                            function-enumerator = <1>;
> 
> Isn't function-enumerator supposed to be unique within a given 
> 'function'?
>

In the following example the output would be:
- amber:lan-1
- white:lan-1

So in theory it's unique for the same color and function. Is it
acceptable? Seems sane that there may be multiple color for the same
function (and enum)

> > +                            default-state = "keep";
> > +                        };
> > +                    };
> >                  };
> >  
> >                  port@2 {
> > -- 
> > 2.39.2
> > 

-- 
	Ansuel



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux