Re: [PATCH v2 6/7] soundwire: qcom: add support for v2.0.0 controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 03/04/2023 14:25, Krzysztof Kozlowski wrote:
Add support for Qualcomm Soundwire Controller with a bit different
register layout.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
  drivers/soundwire/qcom.c | 65 +++++++++++++++++++++++++++++++++++-----
  1 file changed, 57 insertions(+), 8 deletions(-)

diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index b6666ffe37ae..f2e1135ef113 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -31,6 +31,7 @@
  #define SWRM_VERSION_1_3_0					0x01030000
  #define SWRM_VERSION_1_5_1					0x01050001
  #define SWRM_VERSION_1_7_0					0x01070000
+#define SWRM_VERSION_2_0_0					0x02000000
  #define SWRM_COMP_HW_VERSION					0x00
  #define SWRM_COMP_CFG_ADDR					0x04
  #define SWRM_COMP_CFG_IRQ_LEVEL_OR_PULSE_MSK			BIT(1)
@@ -42,6 +43,7 @@
  #define SWRM_COMP_PARAMS_DIN_PORTS_MASK				GENMASK(9, 5)
  #define SWRM_COMP_MASTER_ID					0x104
  #define SWRM_V1_3_INTERRUPT_STATUS				0x200
+#define SWRM_V2_0_INTERRUPT_STATUS				0x5000
  #define SWRM_INTERRUPT_STATUS_RMSK				GENMASK(16, 0)
  #define SWRM_INTERRUPT_STATUS_SLAVE_PEND_IRQ			BIT(0)
  #define SWRM_INTERRUPT_STATUS_NEW_SLAVE_ATTACHED		BIT(1)
@@ -54,24 +56,32 @@
  #define SWRM_INTERRUPT_STATUS_DOUT_PORT_COLLISION		BIT(8)
  #define SWRM_INTERRUPT_STATUS_READ_EN_RD_VALID_MISMATCH		BIT(9)
  #define SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED		BIT(10)
+#define SWRM_INTERRUPT_STATUS_AUTO_ENUM_FAILED			BIT(11)
+#define SWRM_INTERRUPT_STATUS_AUTO_ENUM_TABLE_IS_FULL		BIT(12)
  #define SWRM_INTERRUPT_STATUS_BUS_RESET_FINISHED_V2             BIT(13)
  #define SWRM_INTERRUPT_STATUS_CLK_STOP_FINISHED_V2              BIT(14)
  #define SWRM_INTERRUPT_STATUS_EXT_CLK_STOP_WAKEUP               BIT(16)
  #define SWRM_INTERRUPT_MAX					17
  #define SWRM_V1_3_INTERRUPT_MASK_ADDR				0x204
  #define SWRM_V1_3_INTERRUPT_CLEAR				0x208
+#define SWRM_V2_0_INTERRUPT_CLEAR				0x5008
  #define SWRM_V1_3_INTERRUPT_CPU_EN				0x210
+#define SWRM_V2_0_INTERRUPT_CPU_EN				0x5004
  #define SWRM_V1_3_CMD_FIFO_WR_CMD				0x300
+#define SWRM_V2_0_CMD_FIFO_WR_CMD				0x5020
  #define SWRM_V1_3_CMD_FIFO_RD_CMD				0x304
+#define SWRM_V2_0_CMD_FIFO_RD_CMD				0x5024
  #define SWRM_CMD_FIFO_CMD					0x308
  #define SWRM_CMD_FIFO_FLUSH					0x1
  #define SWRM_V1_3_CMD_FIFO_STATUS				0x30C
+#define SWRM_V2_0_CMD_FIFO_STATUS				0x5050
  #define SWRM_RD_CMD_FIFO_CNT_MASK				GENMASK(20, 16)
  #define SWRM_WR_CMD_FIFO_CNT_MASK				GENMASK(12, 8)
  #define SWRM_CMD_FIFO_CFG_ADDR					0x314
  #define SWRM_CONTINUE_EXEC_ON_CMD_IGNORE			BIT(31)
  #define SWRM_RD_WR_CMD_RETRIES					0x7
  #define SWRM_V1_3_CMD_FIFO_RD_FIFO_ADDR				0x318
+#define SWRM_V2_0_CMD_FIFO_RD_FIFO_ADDR				0x5040
  #define SWRM_RD_FIFO_CMD_ID_MASK				GENMASK(11, 8)
  #define SWRM_ENUMERATOR_CFG_ADDR				0x500
  #define SWRM_ENUMERATOR_SLAVE_DEV_ID_1(m)		(0x530 + 0x8 * (m))
@@ -98,6 +108,11 @@
  #define SWRM_DP_SAMPLECTRL2_BANK(n, m)	(0x113C + 0x100 * (n - 1) + 0x40 * m)
  #define SWRM_DIN_DPn_PCM_PORT_CTRL(n)	(0x1054 + 0x100 * (n - 1))
  #define SWR_V1_3_MSTR_MAX_REG_ADDR				0x1740
+#define SWR_V2_0_MSTR_MAX_REG_ADDR				0x50ac
+
+#define SWRM_V2_0_CLK_CTRL					0x5060
+#define SWRM_V2_0_CLK_CTRL_CLK_START				BIT(0)
+#define SWRM_V2_0_LINK_STATUS					0x5064
#define SWRM_DP_PORT_CTRL_EN_CHAN_SHFT 0x18
  #define SWRM_DP_PORT_CTRL_OFFSET2_SHFT				0x10
@@ -243,6 +258,26 @@ static const struct qcom_swrm_data swrm_v1_6_data = {
  	.reg_layout = swrm_v1_3_reg_layout,
  };
+static const unsigned int swrm_v2_0_reg_layout[] = {
+	[SWRM_REG_FRAME_GEN_ENABLED] = SWRM_V2_0_LINK_STATUS,
+	[SWRM_REG_INTERRUPT_STATUS] = SWRM_V2_0_INTERRUPT_STATUS,
+	[SWRM_REG_INTERRUPT_MASK_ADDR] = 0, /* Not present */
+	[SWRM_REG_INTERRUPT_CLEAR] = SWRM_V2_0_INTERRUPT_CLEAR,
+	[SWRM_REG_INTERRUPT_CPU_EN] = SWRM_V2_0_INTERRUPT_CPU_EN,
+	[SWRM_REG_CMD_FIFO_WR_CMD] = SWRM_V2_0_CMD_FIFO_WR_CMD,
+	[SWRM_REG_CMD_FIFO_RD_CMD] = SWRM_V2_0_CMD_FIFO_RD_CMD,
+	[SWRM_REG_CMD_FIFO_STATUS] = SWRM_V2_0_CMD_FIFO_STATUS,
+	[SWRM_REG_CMD_FIFO_RD_FIFO_ADDR] = SWRM_V2_0_CMD_FIFO_RD_FIFO_ADDR,
+};
+
+static const struct qcom_swrm_data swrm_v2_0_data = {
+	.default_rows = 50,
+	.default_cols = 16,
+	.sw_clk_gate_required = true,
+	.max_reg = SWR_V2_0_MSTR_MAX_REG_ADDR,
+	.reg_layout = swrm_v2_0_reg_layout,
+};
+
  #define to_qcom_sdw(b)	container_of(b, struct qcom_swrm_ctrl, bus)
static int qcom_swrm_ahb_reg_read(struct qcom_swrm_ctrl *ctrl, int reg,
@@ -748,18 +783,23 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
ctrl->intr_mask = SWRM_INTERRUPT_STATUS_RMSK;
  	/* Mask soundwire interrupts */
-	ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR],
-			SWRM_INTERRUPT_STATUS_RMSK);
+	if (ctrl->version < SWRM_VERSION_2_0_0)
+		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR],
+				SWRM_INTERRUPT_STATUS_RMSK);
/* Configure No pings */
  	ctrl->reg_read(ctrl, SWRM_MCP_CFG_ADDR, &val);
  	u32p_replace_bits(&val, SWRM_DEF_CMD_NO_PINGS, SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK);
  	ctrl->reg_write(ctrl, SWRM_MCP_CFG_ADDR, val);
- if (ctrl->version >= SWRM_VERSION_1_7_0) {
+	if (ctrl->version == SWRM_VERSION_1_7_0) {
  		ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU);
  		ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL,
  				SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU);
+	} else if (ctrl->version >= SWRM_VERSION_2_0_0) {

we can move this to a proper switch case rather than if else's

--srini

+		ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU);
+		ctrl->reg_write(ctrl, SWRM_V2_0_CLK_CTRL,
+				SWRM_V2_0_CLK_CTRL_CLK_START);
  	} else {
  		ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START);
  	}
@@ -1609,10 +1649,14 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev)
  	} else {
  		reset_control_reset(ctrl->audio_cgcr);
- if (ctrl->version >= SWRM_VERSION_1_7_0) {
+		if (ctrl->version == SWRM_VERSION_1_7_0) {
  			ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU);
  			ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL,
  					SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU);
+		} else if (ctrl->version >= SWRM_VERSION_2_0_0) {
+			ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU);
+			ctrl->reg_write(ctrl, SWRM_V2_0_CLK_CTRL,
+					SWRM_V2_0_CLK_CTRL_CLK_START);
  		} else {
  			ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START);
  		}
@@ -1620,8 +1664,10 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev)
  			SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET);
ctrl->intr_mask |= SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET;
-		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR],
-				ctrl->intr_mask);
+		if (ctrl->version < SWRM_VERSION_2_0_0)
+			ctrl->reg_write(ctrl,
+					ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR],
+					ctrl->intr_mask);
  		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN],
  				ctrl->intr_mask);
@@ -1645,8 +1691,10 @@ static int __maybe_unused swrm_runtime_suspend(struct device *dev)
  	if (!ctrl->clock_stop_not_supported) {
  		/* Mask bus clash interrupt */
  		ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET;
-		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR],
-				ctrl->intr_mask);
+		if (ctrl->version < SWRM_VERSION_2_0_0)
+			ctrl->reg_write(ctrl,
+					ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR],
+					ctrl->intr_mask);
  		ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN],
  				ctrl->intr_mask);
  		/* Prepare slaves for clock stop */
@@ -1684,6 +1732,7 @@ static const struct of_device_id qcom_swrm_of_match[] = {
  	{ .compatible = "qcom,soundwire-v1.5.1", .data = &swrm_v1_5_data },
  	{ .compatible = "qcom,soundwire-v1.6.0", .data = &swrm_v1_6_data },
  	{ .compatible = "qcom,soundwire-v1.7.0", .data = &swrm_v1_5_data },
+	{ .compatible = "qcom,soundwire-v2.0.0", .data = &swrm_v2_0_data },
  	{/* sentinel */},
  };



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux