Re: [PATCH v3 3/5] phy: qualcomm: phy-qcom-qmp-ufs: add definitions for sa8775p

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11-04-23, 15:04, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> 
> Add QMP PHY config for sa8775p and add support for the new compatible.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 38 +++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> index d58822049211..5612282eb378 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> @@ -853,6 +853,41 @@ static const struct qmp_phy_cfg msm8996_ufsphy_cfg = {
>  	.no_pcs_sw_reset	= true,
>  };
>  
> +

There was already an empty line, this didnt make sense. Please run
checkpatch to avoid missing these style issues

I have fixed it up and applied

> +static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = {
> +	.lanes			= 2,
> +
> +	.offsets		= &qmp_ufs_offsets,
> +
> +	.tbls = {
> +		.serdes		= sm8350_ufsphy_serdes,
> +		.serdes_num	= ARRAY_SIZE(sm8350_ufsphy_serdes),
> +		.tx		= sm8350_ufsphy_tx,
> +		.tx_num		= ARRAY_SIZE(sm8350_ufsphy_tx),
> +		.rx		= sm8350_ufsphy_rx,
> +		.rx_num		= ARRAY_SIZE(sm8350_ufsphy_rx),
> +		.pcs		= sm8350_ufsphy_pcs,
> +		.pcs_num	= ARRAY_SIZE(sm8350_ufsphy_pcs),
> +	},
> +	.tbls_hs_b = {
> +		.serdes		= sm8350_ufsphy_hs_b_serdes,
> +		.serdes_num	= ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes),
> +	},
> +	.tbls_hs_g4 = {
> +		.tx		= sm8350_ufsphy_g4_tx,
> +		.tx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_tx),
> +		.rx		= sm8350_ufsphy_g4_rx,
> +		.rx_num		= ARRAY_SIZE(sm8350_ufsphy_g4_rx),
> +		.pcs		= sm8350_ufsphy_g4_pcs,
> +		.pcs_num	= ARRAY_SIZE(sm8350_ufsphy_g4_pcs),
> +	},
> +	.clk_list		= sm8450_ufs_phy_clk_l,
> +	.num_clks		= ARRAY_SIZE(sm8450_ufs_phy_clk_l),
> +	.vreg_list		= qmp_phy_vreg_l,
> +	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
> +	.regs			= ufsphy_v5_regs_layout,
> +};
> +
>  static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = {
>  	.lanes			= 2,
>  
> @@ -1600,6 +1635,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = {
>  	}, {
>  		.compatible = "qcom,msm8998-qmp-ufs-phy",
>  		.data = &sdm845_ufsphy_cfg,
> +	}, {
> +		.compatible = "qcom,sa8775p-qmp-ufs-phy",
> +		.data = &sa8775p_ufsphy_cfg,
>  	}, {
>  		.compatible = "qcom,sc8180x-qmp-ufs-phy",
>  		.data = &sm8150_ufsphy_cfg,
> -- 
> 2.37.2

-- 
~Vinod



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux