Re: [PATCH 0/2] spi: Add DMA mode support to spi-qcom-qspi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thank you for the review...


On 4/5/2023 2:00 AM, Stephen Boyd wrote:
Quoting Vijaya Krishna Nivarthi (2023-04-04 11:03:18)
There are large number of QSPI irqs that fire during boot/init and later
on every suspend/resume.
This could be made faster by doing DMA instead of PIO.
Below is comparison for number of interrupts raised in 2 acenarios...
Boot up and stabilise
Suspend/Resume

Sequence   PIO    DMA
=======================
Boot-up    69088  19284
S/R        5066   3430

The interrupts are less, yes, but does it save time or power?

We have not made measurements but the change is expected to improve performance.

Testing revealed no regressions.




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux