On 12/04/2023 00:04, Kuogee Hsieh wrote:
In current code, the dsc active bits are set only if the cfg->dsc is set.
However, for displays which are hot-pluggable, there can be a use-case
of disconnecting a DSC supported sink and connecting a non-DSC sink.
For those cases we need to clear DSC active bits during teardown.
Please correct me if I'm wrong here, shouldn't we start using
reset_intf_cfg() during teardown / unplug?
Fixes: ede3c6bb00c ("drm/msm/disp/dpu1: Add DSC support in hw_ctl")
Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index bbdc95c..88e4efe 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -541,10 +541,9 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
if (cfg->merge_3d)
DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE,
BIT(cfg->merge_3d - MERGE_3D_0));
- if (cfg->dsc) {
- DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, DSC_IDX);
- DPU_REG_WRITE(c, CTL_DSC_ACTIVE, cfg->dsc);
- }
+
+ DPU_REG_WRITE(&ctx->hw, CTL_FLUSH, DSC_IDX);
+ DPU_REG_WRITE(c, CTL_DSC_ACTIVE, cfg->dsc);
}
static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
--
With best wishes
Dmitry
