Add the EMAC GDSCs to allow the EMAC hardware to be enabled. Acked-by: Stephen Boyd <sboyd@xxxxxxxxxx> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx> --- Changes since v3: * None Changes since v2: * Add Konrad's Reviewed-by Changes since v1: * Add Stephen's Acked-by * Explicitly tested on x13s laptop with no noticeable side effect (Konrad) drivers/clk/qcom/gcc-sc8280xp.c | 18 ++++++++++++++++++ include/dt-bindings/clock/qcom,gcc-sc8280xp.h | 2 ++ 2 files changed, 20 insertions(+) diff --git a/drivers/clk/qcom/gcc-sc8280xp.c b/drivers/clk/qcom/gcc-sc8280xp.c index b3198784e1c3..04a99dbaa57e 100644 --- a/drivers/clk/qcom/gcc-sc8280xp.c +++ b/drivers/clk/qcom/gcc-sc8280xp.c @@ -6873,6 +6873,22 @@ static struct gdsc usb30_sec_gdsc = { .pwrsts = PWRSTS_RET_ON, }; +static struct gdsc emac_0_gdsc = { + .gdscr = 0xaa004, + .pd = { + .name = "emac_0_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, +}; + +static struct gdsc emac_1_gdsc = { + .gdscr = 0xba004, + .pd = { + .name = "emac_1_gdsc", + }, + .pwrsts = PWRSTS_OFF_ON, +}; + static struct clk_regmap *gcc_sc8280xp_clocks[] = { [GCC_AGGRE_NOC_PCIE0_TUNNEL_AXI_CLK] = &gcc_aggre_noc_pcie0_tunnel_axi_clk.clkr, [GCC_AGGRE_NOC_PCIE1_TUNNEL_AXI_CLK] = &gcc_aggre_noc_pcie1_tunnel_axi_clk.clkr, @@ -7351,6 +7367,8 @@ static struct gdsc *gcc_sc8280xp_gdscs[] = { [USB30_MP_GDSC] = &usb30_mp_gdsc, [USB30_PRIM_GDSC] = &usb30_prim_gdsc, [USB30_SEC_GDSC] = &usb30_sec_gdsc, + [EMAC_0_GDSC] = &emac_0_gdsc, + [EMAC_1_GDSC] = &emac_1_gdsc, }; static const struct clk_rcg_dfs_data gcc_dfs_clocks[] = { diff --git a/include/dt-bindings/clock/qcom,gcc-sc8280xp.h b/include/dt-bindings/clock/qcom,gcc-sc8280xp.h index cb2fb638825c..721105ea4fad 100644 --- a/include/dt-bindings/clock/qcom,gcc-sc8280xp.h +++ b/include/dt-bindings/clock/qcom,gcc-sc8280xp.h @@ -492,5 +492,7 @@ #define USB30_MP_GDSC 9 #define USB30_PRIM_GDSC 10 #define USB30_SEC_GDSC 11 +#define EMAC_0_GDSC 12 +#define EMAC_1_GDSC 13 #endif -- 2.39.2