On 7.04.2023 21:26, Krzysztof Kozlowski wrote:
> The DSI OPP table on SDM630 is used by one DSI0, but on SDM660 is shared
> by two nodes (DSI0 and DSI1), thus it should be rather in top-level, not
> in DSI0.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>
> ---
>
> A cleanup patch to commit a2e5260d0755 ("arm64: dts: qcom: sdm630: move
> DSI opp-table into DSI node").
>
> Follow-up to:
> https://lore.kernel.org/all/20230407163442.ckbd4vxa5b2xu3eu@ripper/
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/sdm630.dtsi | 38 ++++++++++++++--------------
> 1 file changed, 19 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> index 8bdb36a63474..b91e423a3cfc 100644
> --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> @@ -328,6 +328,25 @@ memory@80000000 {
> reg = <0x0 0x80000000 0x0 0x0>;
> };
>
> + dsi_opp_table: opp-table-dsi {
> + compatible = "operating-points-v2";
> +
> + opp-131250000 {
> + opp-hz = /bits/ 64 <131250000>;
> + required-opps = <&rpmpd_opp_svs>;
> + };
> +
> + opp-210000000 {
> + opp-hz = /bits/ 64 <210000000>;
> + required-opps = <&rpmpd_opp_svs_plus>;
> + };
> +
> + opp-262500000 {
> + opp-hz = /bits/ 64 <262500000>;
> + required-opps = <&rpmpd_opp_nom>;
> + };
> + };
> +
> pmu {
> compatible = "arm,armv8-pmuv3";
> interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1591,25 +1610,6 @@ dsi0: dsi@c994000 {
>
> status = "disabled";
>
> - dsi_opp_table: opp-table {
> - compatible = "operating-points-v2";
> -
> - opp-131250000 {
> - opp-hz = /bits/ 64 <131250000>;
> - required-opps = <&rpmpd_opp_svs>;
> - };
> -
> - opp-210000000 {
> - opp-hz = /bits/ 64 <210000000>;
> - required-opps = <&rpmpd_opp_svs_plus>;
> - };
> -
> - opp-262500000 {
> - opp-hz = /bits/ 64 <262500000>;
> - required-opps = <&rpmpd_opp_nom>;
> - };
> - };
> -
> ports {
> #address-cells = <1>;
> #size-cells = <0>;
