Re: [PATCH v4 2/3] irqchip: GIC: Add support for irq_{get,set}_irqchip_state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 14, 2015 at 10:14 PM, Feng Kan <fkan@xxxxxxx> wrote:
> On Thu, May 14, 2015 at 3:32 AM, Linus Walleij <linus.walleij@xxxxxxxxxx> wrote:

>> But surely the GPIO block has its own status register, so are
>> you saying that this register is unreliable?
>
> When the GPIO is used as interrupt, the gpio block does not report the
> status anymore. Which leaves us stuck with SPISR.
>>
>> I can think of a few reasons, like transient IRQs etc but
>> what is actually causing this?
>
> I won't say the obvious.

Yeah I see your problem now :(

I think it's better to fix the access functions so that you can
cross-call to the GIC driver to get the SPISR flag out though.
Let's see what Marc says.

>> Which GPIO driver is this? Is it upstream?
>
> Yes, it is upstream. It is the xgene slimpro gpio driver. I am starting to
> think that we ought to switch to use some gpio poll driver rather than
> using gpio-key.

There is both gpio_keys_polled and IRQ-driven gpio_keys so yeah
that's possible. But honestly I think it's better to deal with this
problem for real because IRQ is more efficient.

So the way I perceive it this is the real problem:

+static int gic_irq_get_irqchip_state(struct irq_data *d,
+                                     enum irqchip_irq_state which, bool *val)
+{
+       switch (which) {
(...)
+       case IRQCHIP_STATE_ACTIVE:
+               *val = gic_peek_irq(d, GIC_DIST_ACTIVE_SET);
+               break;

Here it reads the status from 0x300 where DIST_ACTIVE_SET
is, so if you change GIC_DIST_ACTIVE_SET to
0xd04 (SPISR), does it start working?

I would *guess* that maybe you want to implement and
ask for IRQCHIP_STATE_LINE_LEVEL instead of
IRQCHIP_STATE_ACTIVE, and have that case: read
from 0xd04 (SPISR) instead, because that makes more
sense to me, or am I wrong at it?

+       case IRQCHIP_STATE_LINE_LEVEL:
+               *val = gic_peek_irq(d, GIC_DIST_SPISR);
+               break;

And then put a define into <linux/irqchip/arm-gic.h> for
GIC_DIST_SPISR.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux