On Fri, Apr 07, 2023 at 11:41:22AM +0530, Bhupesh Sharma wrote:
> Add USB superspeed qmp phy node to dtsi.
>
> Make sure that the various board dts files (which include sm4250.dtsi file)
> continue to work as intended.
>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
> ---
> .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 3 ++
> arch/arm64/boot/dts/qcom/sm6115.dtsi | 36 +++++++++++++++++--
> .../boot/dts/qcom/sm6115p-lenovo-j606f.dts | 3 ++
> 3 files changed, 40 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> index a1f0622db5a0..75951fd439df 100644
> --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> @@ -242,6 +242,9 @@ &usb {
> &usb_dwc3 {
> maximum-speed = "high-speed";
> dr_mode = "peripheral";
> +
> + phys = <&usb_hsphy>;
> + phy-names = "usb2-phy";
> };
>
> &usb_hsphy {
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 2505c815c65a..f42065a0a71d 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -651,6 +651,38 @@ usb_hsphy: phy@1613000 {
> status = "disabled";
> };
>
> + usb_qmpphy: phy@1615000 {
> + compatible = "qcom,sm6115-qmp-usb3-phy";
> + reg = <0x0 0x01615000 0x0 0x200>;
> + clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
> + <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
> + clock-names = "cfg_ahb",
> + "ref",
> + "com_aux";
> + resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
> + <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
> + reset-names = "phy", "phy_phy";
> + status = "disabled";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + usb_ssphy: phy@1615200 {
Please don't introduce the old-style QMP binding in new platforms.
Thanks,
Bjorn
> + reg = <0x0 0x01615200 0x0 0x200>,
> + <0x0 0x01615400 0x0 0x200>,
> + <0x0 0x01615c00 0x0 0x400>,
> + <0x0 0x01615600 0x0 0x200>,
> + <0x0 0x01615800 0x0 0x200>,
> + <0x0 0x01615a00 0x0 0x100>;
> + #clock-cells = <0>;
> + #phy-cells = <0>;
> + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> + clock-names = "pipe0";
> + clock-output-names = "usb3_phy_pipe_clk_src";
> + };
> + };
> +
> qfprom@1b40000 {
> compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
> reg = <0x0 0x01b40000 0x0 0x7000>;
> @@ -1101,8 +1133,8 @@ usb_dwc3: usb@4e00000 {
> compatible = "snps,dwc3";
> reg = <0x0 0x04e00000 0x0 0xcd00>;
> interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> - phys = <&usb_hsphy>;
> - phy-names = "usb2-phy";
> + phys = <&usb_hsphy>, <&usb_ssphy>;
> + phy-names = "usb2-phy", "usb3-phy";
> iommus = <&apps_smmu 0x120 0x0>;
> snps,dis_u2_susphy_quirk;
> snps,dis_enblslpm_quirk;
> diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> index 10c9d338446c..d60cc024749b 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> @@ -280,6 +280,9 @@ &usb {
> &usb_dwc3 {
> maximum-speed = "high-speed";
> dr_mode = "peripheral";
> +
> + phys = <&usb_hsphy>;
> + phy-names = "usb2-phy";
> };
>
> &usb_hsphy {
> --
> 2.38.1
>
