Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index 27ceaa94c8bd..59860a2223b8 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -729,7 +729,6 @@ usb_id_default: usb-id-default-state {
function = "gpio";
drive-strength = <8>;
- input-enable;
bias-pull-up;
};
@@ -770,7 +769,6 @@ msm_key_volp_n_default: msm-key-volp-n-default-state {
function = "gpio";
drive-strength = <8>;
- input-enable;
bias-pull-up;
};
};
--
2.34.1
