From: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
The qdsp6ss memory region is being shared by ADSP remoteproc device and
lpasscc clock device, hence causing memory conflict.
To avoid this, when qdsp6ss clocks are being enabled in remoteproc driver,
skip qdsp6ss clock registration if "qcom,adsp-pil-mode" is enabled and
also assign max_register value.
Fixes: 4ab43d171181 ("clk: qcom: Add lpass clock controller driver for SC7280")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
drivers/clk/qcom/lpasscc-sc7280.c | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/qcom/lpasscc-sc7280.c b/drivers/clk/qcom/lpasscc-sc7280.c
index 48432010ce24..0df2b29e95e3 100644
--- a/drivers/clk/qcom/lpasscc-sc7280.c
+++ b/drivers/clk/qcom/lpasscc-sc7280.c
@@ -121,14 +121,18 @@ static int lpass_cc_sc7280_probe(struct platform_device *pdev)
goto destroy_pm_clk;
}
- lpass_regmap_config.name = "qdsp6ss";
- desc = &lpass_qdsp6ss_sc7280_desc;
-
- ret = qcom_cc_probe_by_index(pdev, 0, desc);
- if (ret)
- goto destroy_pm_clk;
+ if (!of_property_read_bool(pdev->dev.of_node, "qcom,adsp-pil-mode")) {
+ lpass_regmap_config.name = "qdsp6ss";
+ lpass_regmap_config.max_register = 0x3f;
+ desc = &lpass_qdsp6ss_sc7280_desc;
+
+ ret = qcom_cc_probe_by_index(pdev, 0, desc);
+ if (ret)
+ goto destroy_pm_clk;
+ }
lpass_regmap_config.name = "top_cc";
+ lpass_regmap_config.max_register = 0x4;
desc = &lpass_cc_top_sc7280_desc;
ret = qcom_cc_probe_by_index(pdev, 1, desc);
--
2.25.1
