[PATCH v1 08/10] scsi: ufs-qcom: enable UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE quirk

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Current version of host controller on QUALCOMM Technologies requires
this quirk to be enabled, as DME commands to device must be sent
only in AUTO mode (SLOW AUTO or FAST AUTO).

Signed-off-by: Yaniv Gardi <ygardi@xxxxxxxxxxxxxx>

---
 drivers/scsi/ufs/ufs-qcom.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 6e5b183..de9cfb0 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -709,7 +709,8 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
 
 	if (host->hw_ver.major == 0x01) {
 		hba->quirks |= UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS
-			    | UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP;
+			    | UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP
+			    | UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE;
 
 		if (host->hw_ver.minor == 0x0001 && host->hw_ver.step == 0x0001)
 			hba->quirks |= UFSHCD_QUIRK_BROKEN_INTR_AGGR;
@@ -721,6 +722,7 @@ static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
 		if (!ufs_qcom_cap_qunipro(host))
 			/* Legacy UniPro mode still need following quirks */
 			hba->quirks |= (UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS
+				| UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE
 				| UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP);
 	}
 }
-- 
1.8.5.2

-- 
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux