On 06/04/2023 18:25, Konrad Dybcio wrote:
Enable the onboard QCA Wi-Fi. HW identifiers for reference:
qmi chip_id 0x320 chip_family 0x4001 board_id 0xff soc_id 0x400e0000
Firmware sources:
/vendor/firmware_mnt/image/wlanmdsp.bin -> qcom/.../wlanmdsp.mbn
/vendor/firmware_mnt/image/bdwlan.bXX [1] -> [2] -> ath10k/.../board-2.bin
[3] -> ath10k/.../firmware-5.bin
Not sure where 3 comes from on the device itself, gotta investigate that..
According to [4], it's called WCN3990_STRAIT.
[1] XX = board_id printed when the file is missing or by your downstream
kernel firmware loader in the dmesg; if XX=ff, use bdwlan.bin
Since the board_id is 0xff, please add qcom,ath10k-calibration-variant
Ideally, could you please send the bdwlan to ath10k for inclusion, see
https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles .
[2] https://github.com/jhugo/linux/blob/5.5rc2_wifi/README
[3] https://github.com/kvalo/ath10k-firmware/blob/master/WCN3990/hw1.0/HL3.1/WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1/firmware-5.bin
[4] https://git.codelinaro.org/clo/la/platform/vendor/qcom-opensource/wlan/qca-wifi-host-cmn/-/blob/LA.VENDOR.1.0.r1-20700-WAIPIO.QSSI13.0/hif/src/hif_hw_version.h#L55
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
index 2aac25171dec..4ba8e59a27d8 100644
--- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
@@ -315,6 +315,14 @@ &usb_hsphy {
status = "okay";
};
+&wifi {
+ vdd-0.8-cx-mx-supply = <&pm6125_l8>;
+ vdd-1.8-xo-supply = <&pm6125_l16>;
+ vdd-1.3-rfa-supply = <&pm6125_l17>;
+ vdd-3.3-ch0-supply = <&pm6125_l23>;
+ status = "okay";
+};
+
&xo_board {
clock-frequency = <19200000>;
};
--
With best wishes
Dmitry
