[PATCH 2/3] thermal/drivers/tsens: Describe sensor registers via a structure

["Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>]

Define sensor identifiers and optional shifts in a single data-structure.
This facilitates extraction of calibration data from non-contiguous
addresses.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
 drivers/thermal/qcom/tsens-v0_1.c | 56 +++++++++++++++++++++++++++++--
 drivers/thermal/qcom/tsens.c      |  5 +--
 drivers/thermal/qcom/tsens.h      | 16 ++++++++-
 3 files changed, 72 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index e89c6f39a3aea..c20c002d98650 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -319,10 +319,31 @@ static const struct tsens_ops ops_8916 = {
 	.get_temp	= get_temp_common,
 };
 
+struct tsens_reg_data reg_8916[] = {
+	{
+		.id = 0,
+	},
+	{
+		.id = 1,
+	},
+	{
+		.id = 2,
+	},
+	{
+		.id = 3,
+	},
+	{
+		.id = 4,
+	},
+	{
+		.id = 5,
+	},
+};
+
 struct tsens_plat_data data_8916 = {
 	.num_sensors	= 5,
 	.ops		= &ops_8916,
-	.hw_ids		= (unsigned int []){0, 1, 2, 4, 5 },
+	.reg		= reg_8916,
 
 	.feat		= &tsens_v0_1_feat,
 	.fields	= tsens_v0_1_regfields,
@@ -334,10 +355,41 @@ static const struct tsens_ops ops_8939 = {
 	.get_temp	= get_temp_common,
 };
 
+struct tsens_reg_data reg_8939[] = {
+	{
+		.id = 0,
+	},
+	{
+		.id = 1,
+	},
+	{
+		.id = 2,
+	},
+	{
+		.id = 3,
+	},
+	{
+		.id = 5,
+	},
+	{
+		.id = 6,
+	},
+	{
+		.id = 7,
+	},
+	{
+		.id = 8,
+	},
+	{
+		.id = 9,
+		.p2_shift = 8,
+	},
+};
+
 struct tsens_plat_data data_8939 = {
 	.num_sensors	= 9,
 	.ops		= &ops_8939,
-	.hw_ids		= (unsigned int []){ 0, 1, 2, 3, 5, 6, 7, 8, 9, /* 10 */ },
+	.reg		= reg_8939,
 
 	.feat		= &tsens_v0_1_feat,
 	.fields	= tsens_v0_1_regfields,
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 7165b0bfe8b9f..a260f563b4889 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -1274,13 +1274,14 @@ static int tsens_probe(struct platform_device *pdev)
 	priv->num_sensors = num_sensors;
 	priv->ops = data->ops;
 	for (i = 0;  i < priv->num_sensors; i++) {
-		if (data->hw_ids)
-			priv->sensor[i].hw_id = data->hw_ids[i];
+		if (data->reg)
+			priv->sensor[i].hw_id = data->reg[i].id;
 		else
 			priv->sensor[i].hw_id = i;
 	}
 	priv->feat = data->feat;
 	priv->fields = data->fields;
+	priv->reg = data->reg;
 
 	platform_set_drvdata(pdev, priv);
 
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index dba9cd38f637c..31f67da03bce6 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -517,18 +517,31 @@ struct tsens_features {
 	int trip_max_temp;
 };
 
+/**
+ * struct tsens_reg_data - describes register data retrieved non-contiguously
+ * @id: thermal sensor identifier
+ * @p1_shift: When non-zero is the # of bits to right shift p1 MSB by
+ * @p2_shift: When non-zero is the # of bits to right shift p2 MSB by
+ */
+struct tsens_reg_data {
+	unsigned int id;
+	unsigned int p1_shift;
+	unsigned int p2_shift;
+};
+
 /**
  * struct tsens_plat_data - tsens compile-time platform data
  * @num_sensors: Number of sensors supported by platform
  * @ops: operations the tsens instance supports
  * @hw_ids: Subset of sensors ids supported by platform, if not the first n
+ * @reg: Describe sensor id and calibration shifts
  * @feat: features of the IP
  * @fields: bitfield locations
  */
 struct tsens_plat_data {
 	const u32		num_sensors;
 	const struct tsens_ops	*ops;
-	unsigned int		*hw_ids;
+	struct tsens_reg_data	*reg;
 	struct tsens_features	*feat;
 	const struct reg_field		*fields;
 };
@@ -575,6 +588,7 @@ struct tsens_priv {
 	struct regmap_field		*rf[MAX_REGFIELDS];
 	struct tsens_context		ctx;
 	struct tsens_features		*feat;
+	struct tsens_reg_data		*reg;
 	const struct reg_field		*fields;
 	const struct tsens_ops		*ops;
 
-- 
2.39.2