Re: [PATCH V2 0/2] Add initial support for RDP468 of IPQ5332 family

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 3/23/2023 3:01 PM, Kathiravan T wrote:
Add the initial device tree support for the RDP(Reference Design
Platform)468 based on IPQ5332 family of SoCs. This patch carries the
support for Console UART, SPI NOR, eMMC.

This series depends on the below which adds support the SPI NOR
https://lore.kernel.org/linux-arm-msm/20230320104530.30411-1-quic_kathirav@xxxxxxxxxxx/

V1 can be found here
https://lore.kernel.org/linux-arm-msm/20230323044929.8694-1-quic_kathirav@xxxxxxxxxxx/


Gentle Reminder...



Kathiravan T (2):
   dt-bindings: arm: qcom: document MI01.6 board based on IPQ5332 family
   arm64: dts: qcom: ipq5332: add support for the RDP468 variant

  .../devicetree/bindings/arm/qcom.yaml         |   2 +
  arch/arm64/boot/dts/qcom/Makefile             |   1 +
  arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts   | 103 ++++++++++++++++++
  3 files changed, 106 insertions(+)
  create mode 100644 arch/arm64/boot/dts/qcom/ipq5332-rdp468.dts




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux