Re: [PATCH 1/2] dt-bindings: net: Convert ATH10K to YAML

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/04/2023 02:59, Konrad Dybcio wrote:
> Convert the ATH10K bindings to YAML.
> 
> Dropped properties that are absent at the current state of mainline:
> - qcom,msi_addr
> - qcom,msi_base
> 
> qcom,coexist-support and qcom,coexist-gpio-pin do very little and should
> be reconsidered on the driver side, especially the latter one.
> 
> Somewhat based on the ath11k bindings.
> 

Thank you for your patch. There is something to discuss/improve.

> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
> new file mode 100644
> index 000000000000..2ff004e404d9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
> @@ -0,0 +1,357 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/wireless/qcom,ath10k.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies ATH10K wireless devices
> +
> +maintainers:
> +  - Kalle Valo <kvalo@xxxxxxxxxx>
> +
> +description: |

Do not need '|'.

> +  Qualcomm Technologies, Inc. IEEE 802.11ac devices.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,ath10k # SDIO-based devices
> +      - qcom,ipq4019-wifi
> +      - qcom,wcn3990-wifi # SNoC-based devices
> +
> +  reg:
> +    maxItems: 1
> +
> +  reg-names:
> +    items:
> +      - const: membase
> +
> +  interrupts:
> +    minItems: 12
> +    maxItems: 17
> +
> +  interrupt-names:
> +    minItems: 12
> +    maxItems: 17
> +
> +  memory-region:
> +    maxItems: 1
> +    description:
> +      Reference to the MSA memory region used by the Wi-Fi firmware
> +      running on the Q6 core.
> +
> +  iommus:
> +    minItems: 1
> +    maxItems: 2
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 3
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 3
> +
> +  resets:
> +    minItems: 6

Drop minItems here.

> +    maxItems: 6
> +
> +  reset-names:
> +    items:
> +      - const: wifi_cpu_init
> +      - const: wifi_radio_srif
> +      - const: wifi_radio_warm
> +      - const: wifi_radio_cold
> +      - const: wifi_core_warm
> +      - const: wifi_core_cold
> +
> +  ext-fem-name:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description: Name of external front end module used.
> +    items:

Drop items (it's just enum)

> +      enum:
> +        - microsemi-lx5586
> +        - sky85703-11
> +        - sky85803
> +
> +  wifi-firmware:
> +    type: object

additionalProperties: false

> +    description: |
> +      The ATH10K Wi-Fi node can contain one optional firmware subnode.
> +      Firmware subnode is needed when the platform does not have Trustzone.

properties:
  iommus:
    maxItems: 1

> +    required:
> +      - iommus
> +
> +  qcom,ath10k-calibration-data:
> +    $ref: /schemas/types.yaml#/definitions/uint8-array
> +    description:
> +      Calibration data + board-specific data as a byte array. The length
> +      can vary between hardware versions.
> +
> +  qcom,ath10k-calibration-variant:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description:
> +      Unique variant identifier of the calibration data in board-2.bin
> +      for designs with colliding bus and device specific ids
> +
> +  qcom,ath10k-pre-calibration-data:
> +    $ref: /schemas/types.yaml#/definitions/uint8-array
> +    description:
> +      Pre-calibration data as a byte array. The length can vary between
> +      hardware versions.
> +
> +  qcom,coexist-support:
> +    $ref: /schemas/types.yaml#/definitions/uint8

enum: [0, 1]

> +    description:
> +      0 or 1 to indicate coex support by the hardware.
> +
> +  qcom,coexist-gpio-pin:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      COEX GPIO number provided to the Wi-Fi firmware.
> +
> +  qcom,msa-fixed-perm:
> +    type: boolean
> +    description:
> +      Whether to skip executing an SCM call that reassigns the memory
> +      region ownership.
> +
> +  qcom,smem-states:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: State bits used by the AP to signal the WLAN Q6.
> +    items:
> +      - description: Signal bits used to enable/disable low power mode
> +                     on WCN in the case of WoW (Wake on Wireless).
> +
> +  qcom,smem-state-names:
> +    description: The names of the state bits used for SMP2P output.
> +    items:
> +      - const: wlan-smp2p-out
> +
> +  qcom,snoc-host-cap-8bit-quirk:
> +    type: boolean
> +    description:
> +      Quirk specifying that the firmware expects the 8bit version
> +      of the host capability QMI request
> +
> +  qcom,xo-cal-data:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      XO cal offset to be configured in XO trim register.
> +
> +  vdd-0.8-cx-mx-supply:
> +    description: Main logic power rail
> +
> +  vdd-1.8-xo-supply:
> +    description: Crystal oscillator supply
> +
> +  vdd-1.3-rfa-supply:
> +    description: RFA supply
> +
> +  vdd-3.3-ch0-supply:
> +    description: Primary Wi-Fi antenna supply
> +
> +  vdd-3.3-ch1-supply:
> +    description: Secondary Wi-Fi antenna supply
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,ipq4019-wifi
> +    then:
> +      properties:
> +        interrupts:
> +          minItems: 17
> +          maxItems: 17
> +
> +        interrupt-names:
> +          minItems: 17
> +          items:
> +            - const: msi0
> +            - const: msi1
> +            - const: msi2
> +            - const: msi3
> +            - const: msi4
> +            - const: msi5
> +            - const: msi6
> +            - const: msi7
> +            - const: msi8
> +            - const: msi9
> +            - const: msi10
> +            - const: msi11
> +            - const: msi12
> +            - const: msi13
> +            - const: msi14
> +            - const: msi15
> +            - const: legacy
> +
> +        clocks:
> +          items:
> +            - description: Wi-Fi command clock
> +            - description: Wi-Fi reference clock
> +            - description: Wi-Fi RTC clock
> +
> +        clock-names:
> +          items:
> +            - const: wifi_wcss_cmd
> +            - const: wifi_wcss_ref
> +            - const: wifi_wcss_rtc
> +
> +      required:
> +        - clocks
> +        - clock-names
> +        - interrupts
> +        - interrupt-names
> +        - resets
> +        - reset-names
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,wcn3990-wifi
> +
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 1
> +          items:
> +            - description: XO reference clock
> +            - description: Qualcomm Debug Subsystem clock
> +
> +        clock-names:
> +          minItems: 1
> +          items:
> +            - const: cxo_ref_clk_pin
> +            - const: qdss
> +
> +        interrupts:
> +          items:
> +            - description: CE0
> +            - description: CE1
> +            - description: CE2
> +            - description: CE3
> +            - description: CE4
> +            - description: CE5
> +            - description: CE6
> +            - description: CE7
> +            - description: CE8
> +            - description: CE9
> +            - description: CE10
> +            - description: CE11
> +
> +      required:
> +        - interrupts
> +
> +examples:
> +  # SNoC
> +  - |
> +    #include <dt-bindings/clock/qcom,rpmcc.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    reserved-memory {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        wlan_msa_mem: memory@4cd000 {
> +            no-map;
> +            reg = <0x0 0x004cd000 0x0 0x1000>;
> +        };
> +    };

Drop the reserved memory node, it's more-or-less obvious (same everywhere).

> +
> +    wifi: wifi@18800000 {

Drop label.

> +      compatible = "qcom,wcn3990-wifi";
> +      reg = <0x18800000 0x800000>;
> +      reg-names = "membase";
> +      memory-region = <&wlan_msa_mem>;
> +      clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
> +      clock-names = "cxo_ref_clk_pin";
> +      interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
> +                   <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
> +                   <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
> +                   <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
> +                   <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
> +                   <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
> +                   <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
> +                   <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
> +                   <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
> +                   <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
> +                   <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
> +                   <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
> +      iommus = <&anoc2_smmu 0x1900>,
> +               <&anoc2_smmu 0x1901>;
> +      qcom,snoc-host-cap-8bit-quirk;
> +      status = "disabled";

Drop status from examples.

The example looks a bit incomplete. Please add supplies and
wifi-firmware node.

> +    };
> +
> +  # AHB
> +  - |
> +    #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
> +
> +    wifi0: wifi@a000000 {

Drop label.

> +        compatible = "qcom,ipq4019-wifi";
> +        reg = <0xa000000 0x200000>;
> +        resets = <&gcc WIFI0_CPU_INIT_RESET>,
> +                 <&gcc WIFI0_RADIO_SRIF_RESET>,
> +                 <&gcc WIFI0_RADIO_WARM_RESET>,
> +                 <&gcc WIFI0_RADIO_COLD_RESET>,
> +                 <&gcc WIFI0_CORE_WARM_RESET>,
> +                 <&gcc WIFI0_CORE_COLD_RESET>;
> +        reset-names = "wifi_cpu_init",
> +                      "wifi_radio_srif",
> +                      "wifi_radio_warm",
> +                      "wifi_radio_cold",
> +                      "wifi_core_warm",
> +                      "wifi_core_cold";
> +        clocks = <&gcc GCC_WCSS2G_CLK>,
> +                 <&gcc GCC_WCSS2G_REF_CLK>,
> +                 <&gcc GCC_WCSS2G_RTC_CLK>;
> +        clock-names = "wifi_wcss_cmd",
> +                      "wifi_wcss_ref",
> +                      "wifi_wcss_rtc";
> +        interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-names =  "msi0",
> +                           "msi1",
> +                           "msi2",
> +                           "msi3",
> +                           "msi4",
> +                           "msi5",
> +                           "msi6",
> +                           "msi7",
> +                           "msi8",
> +                           "msi9",
> +                           "msi10",
> +                           "msi11",
> +                           "msi12",
> +                           "msi13",
> +                           "msi14",
> +                           "msi15",
> +                           "legacy";
> +        status = "disabled";

Ditto

> +      };
> 

Best regards,
Krzysztof




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux