v1 -> v2: - Fix missing newline in pm2250.dtsi - Use an enum in [2/5] to allow for more QRB2210 boards - Squash the dt patches into one per SoC, PMIC and board - pick up rb on [1/5] v1: https://lore.kernel.org/r/20230403-topic-rb1_qcm-v1-0-ca849b62ba07@xxxxxxxxxx This series brings basic support for the Qualcomm Robotics RB1 board, including but not limited to: - TSENS-connected thermal management - USB2 - eMMC (uSD depends requires regulators to work, will be sent separately) - the necessary plumbing for *DSP + Wi-Fi (that also needs regulators) - buttons A compatible in the SCM C driver is not added on purpose, as: 1. it's not neccessary before we figure out disabling rpmcc, the dt part is in regardless (the clock it consumes is always-on today) 2. a point to get rid of SoC-specific compatibles in there was raised See also: https://www.thundercomm.com/product/qualcomm-robotics-rb1-platform/ https://www.qualcomm.com/products/internet-of-things/industrial/industrial-automation/qualcomm-robotics-rb1-platform Dependencies: - https://lore.kernel.org/linux-arm-msm/20230314-topic-2290_compats-v1-0-47e26c3c0365@xxxxxxxxxx/ - https://lore.kernel.org/linux-arm-msm/20230315183231.3562580-1-konrad.dybcio@xxxxxxxxxx/ - https://lore.kernel.org/linux-arm-msm/20230323173019.3706069-1-dianders@xxxxxxxxxxxx/ Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> --- Konrad Dybcio (5): dt-bindings: firmware: document Qualcomm QCM2290 SCM dt-bindings: arm: qcom: Add QRB2210/QCM2290 and RB1 board arm64: dts: qcom: Add initial QCM2290 device tree arm64: dts: qcom: Add initial PM2250 device tree arm64: dts: qcom: Add initial QTI RB1 device tree Documentation/devicetree/bindings/arm/qcom.yaml | 9 + .../devicetree/bindings/firmware/qcom,scm.yaml | 3 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/pm2250.dtsi | 63 + arch/arm64/boot/dts/qcom/qcm2290.dtsi | 1561 ++++++++++++++++++++ arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 112 ++ 6 files changed, 1749 insertions(+) --- base-commit: 8417c8f5007bf4567ccffda850a3157c7d905f67 change-id: 20230403-topic-rb1_qcm-78a8826b34b6 Best regards, -- Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
