Add nodes for LPASS Soundwire v2.0.0 controllers. Use labels with indices matching downstream DTS, to make any comparisons easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- Changes since v2: 1. Use labels instead of comments (Konrad). 2. Use interrupts instead of interupts-extended (Konrad) Changes since v1: 1. Correct IO range length. The bindings and driver are here: https://lore.kernel.org/linux-arm-msm/20230403132503.62090-1-krzysztof.kozlowski@xxxxxxxxxx/T/#t Cc: Patrick Lai <quic_plai@xxxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm8550.dtsi | 109 +++++++++++++++++++++++++++ 1 file changed, 109 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index dc6150e97d46..f9eaede39b5b 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -2004,6 +2004,33 @@ lpass_wsa2macro: codec@6aa0000 { #sound-dai-cells = <1>; }; + swr3: soundwire-controller@6ab0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ab0000 0 0x10000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsa2macro>; + clock-names = "iface"; + label = "WSA2"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + lpass_rxmacro: codec@6ac0000 { compatible = "qcom,sm8550-lpass-rx-macro"; reg = <0 0x06ac0000 0 0x1000>; @@ -2023,6 +2050,33 @@ lpass_rxmacro: codec@6ac0000 { #sound-dai-cells = <1>; }; + swr1: soundwire-controller@6ad0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ad0000 0 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_rxmacro>; + clock-names = "iface"; + label = "RX"; + + qcom,din-ports = <0>; + qcom,dout-ports = <10>; + + qcom,ports-sinterval = <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + lpass_txmacro: codec@6ae0000 { compatible = "qcom,sm8550-lpass-tx-macro"; reg = <0 0x06ae0000 0 0x1000>; @@ -2061,6 +2115,61 @@ lpass_wsamacro: codec@6b00000 { #sound-dai-cells = <1>; }; + swr0: soundwire-controller@6b10000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06b10000 0 0x10000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsamacro>; + clock-names = "iface"; + label = "WSA"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + swr2: soundwire-controller@6d30000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06d30000 0 0x10000>; + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core", "wakeup"; + clocks = <&lpass_vamacro>; + clock-names = "iface"; + label = "TX"; + + qcom,din-ports = <4>; + qcom,dout-ports = <0>; + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + lpass_vamacro: codec@6d44000 { compatible = "qcom,sm8550-lpass-va-macro"; reg = <0 0x06d44000 0 0x1000>; -- 2.34.1
