On 2023-03-21 23:12:31, Konrad Dybcio wrote:
When you get to resending this, change sm8350-nagara in the title to
sm8350-sagami :)
- Marijn
> As we're heading towards getting the status property last everywhere,
> take care of it for SM8350 SONY Sagami.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
> .../boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi | 30 ++++++++++------------
> 1 file changed, 14 insertions(+), 16 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
> index b2baa81baf5e..95b1ba4ce470 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
> @@ -189,8 +189,8 @@ vph_pwr: vph-pwr-regulator {
> };
>
> &adsp {
> - status = "okay";
> firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn";
> + status = "okay";
> };
>
> &apps_rsc {
> @@ -542,27 +542,27 @@ pmr735a_l7: ldo7 {
> };
>
> &cdsp {
> - status = "okay";
> firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn";
> + status = "okay";
> };
>
> &i2c1 {
> - status = "okay";
> clock-frequency = <1000000>;
> + status = "okay";
>
> /* Some subset of SONY IMX663 camera sensor @ 38 */
> };
>
> &i2c4 {
> - status = "okay";
> clock-frequency = <400000>;
> + status = "okay";
>
> /* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */
> };
>
> &i2c11 {
> - status = "okay";
> clock-frequency = <1000000>;
> + status = "okay";
>
> cs35l41_l: speaker-amp@40 {
> compatible = "cirrus,cs35l41";
> @@ -596,31 +596,31 @@ cs35l41_r: speaker-amp@41 {
> };
>
> &i2c12 {
> - status = "okay";
> /* Clock frequency was not specified downstream, let's park it to 100 KHz */
> clock-frequency = <100000>;
> + status = "okay";
>
> /* AMS TCS3490 RGB+IR color sensor @ 72 */
> };
>
> &i2c13 {
> - status = "okay";
> /* Clock frequency was not specified downstream, let's park it to 100 KHz */
> clock-frequency = <100000>;
> + status = "okay";
>
> /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
> };
>
> &i2c15 {
> - status = "okay";
> clock-frequency = <400000>;
> + status = "okay";
>
> /* NXP SN1X0 NFC @ 28 */
> };
>
> &i2c17 {
> - status = "okay";
> clock-frequency = <1000000>;
> + status = "okay";
>
> /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
> };
> @@ -652,8 +652,8 @@ mdss_dp_altmode: endpoint {
> };
>
> &mpss {
> - status = "okay";
> firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn";
> + status = "okay";
> };
>
> &pm8350_gpios {
> @@ -719,8 +719,8 @@ &pon_pwrkey {
> };
>
> &pon_resin {
> - status = "okay";
> linux,code = <KEY_VOLUMEUP>;
> + status = "okay";
> };
>
> &qupv3_id_0 {
> @@ -748,8 +748,8 @@ &sdhc_2 {
> };
>
> &slpi {
> - status = "okay";
> firmware-name = "qcom/sm8350/Sony/sagami/slpi.mbn";
> + status = "okay";
> };
>
> &spi14 {
> @@ -1038,16 +1038,14 @@ usb_1_dwc3_ss: endpoint {
> };
>
> &usb_1_hsphy {
> - status = "okay";
> -
> vdda-pll-supply = <&pm8350_l5>;
> vdda18-supply = <&pm8350c_l1>;
> vdda33-supply = <&pm8350_l2>;
> + status = "okay";
> };
>
> &usb_1_qmpphy {
> - status = "okay";
> -
> vdda-phy-supply = <&pm8350_l6>;
> vdda-pll-supply = <&pm8350_l1>;
> + status = "okay";
> };
>
> --
> 2.40.0
>
