Re: [alsa-devel] [RFC PATCH 00/14] ASoC: qcom: add support to apq8016 audio

[Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>]

Hi Kenneth,

On 12/05/15 05:06, Kenneth Westfield wrote:
> On Tue, May 05, 2015 at 11:54:16PM -0700, Srinivas Kandagatla wrote:
> > Hi Kenneth,
> >
> > On 06/05/15 06:47, Kenneth Westfield wrote:
> > > > > I will test the patches and let you know by Wednesday.  Also, I posted
> > > > > some comments, but Patrick should be posting his comments separately
> > > > > later next week.
> > > Srinivas,
> > >
> > > After applying the patches, audio playback is no longer functional on
> > > the storm board.  Give me some time to debug this and I will get back
> > > to you.
> > I found atleast one issue with rdma audif bits in ipq806x lpass
> >
> > could you try change, this will be fixed properly in next version.
> >
> > -----------------------><---------------------------------------------
> > diff --git a/sound/soc/qcom/lpass-ipq806x.c
> > b/sound/soc/qcom/lpass-ipq806x.c
> > index 11a7053..2b00355 100644
> > --- a/sound/soc/qcom/lpass-ipq806x.c
> > +++ b/sound/soc/qcom/lpass-ipq806x.c
> > @@ -69,6 +69,7 @@ struct lpass_variant ipq806x_data = {
> >          .rdma_reg_base          = 0x6000,
> >          .rdma_reg_stride        = 0x1000,
> >          .rdma_channels          = 4,
> > +       .rdmactl_audif_start    = 4,
> >          .dai_driver             = &lpass_cpu_dai_driver,
> >          .num_dai                = 1,
> >
> > -----------------------><---------------------------------------------
>
> Srinivas,
>
> I was able to get audio working on the Storm board.  There were several
> issues.  First, the I2S control port was saved in the DAI driver id field
> (which was 4), but the DAI id field was used by the macro (which was 0).
> The patch below fixed it:
>
> -----------------------><---------------------------------------------
> diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c
> index 17ad20d..58ae8af 100644
> --- a/sound/soc/qcom/lpass-cpu.c
> +++ b/sound/soc/qcom/lpass-cpu.c
> @@ -146,7 +146,7 @@ static int lpass_cpu_daiops_hw_params(struct snd_pcm_substream *substream,
>   	}
>
>   	ret = regmap_write(drvdata->lpaif_map,
> -			   LPAIF_I2SCTL_REG(drvdata->variant, dai->id),
> +			   LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id),
>   			   regval);
>   	if (ret) {
>   		dev_err(dai->dev, "%s() error writing to i2sctl reg: %d\n",
> @@ -171,7 +171,7 @@ static int lpass_cpu_daiops_hw_free(struct snd_pcm_substream *substream,
>   	int ret;
>
>   	ret = regmap_write(drvdata->lpaif_map,
> -			   LPAIF_I2SCTL_REG(drvdata->variant, dai->id), 0);
> +			   LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id), 0);
>   	if (ret)
>   		dev_err(dai->dev, "%s() error writing to i2sctl reg: %d\n",
>   				__func__, ret);
> @@ -186,7 +186,7 @@ static int lpass_cpu_daiops_prepare(struct snd_pcm_substream *substream,
>   	int ret;
>
>   	ret = regmap_update_bits(drvdata->lpaif_map,
> -			LPAIF_I2SCTL_REG(drvdata->variant, dai->id),
> +			LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id),
>   			LPAIF_I2SCTL_SPKEN_MASK, LPAIF_I2SCTL_SPKEN_ENABLE);
>   	if (ret)
>   		dev_err(dai->dev, "%s() error writing to i2sctl reg: %d\n",
> @@ -206,7 +206,7 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream,
>   	case SNDRV_PCM_TRIGGER_RESUME:
>   	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
>   		ret = regmap_update_bits(drvdata->lpaif_map,
> -				LPAIF_I2SCTL_REG(drvdata->variant, dai->id),
> +				LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id),
>   				LPAIF_I2SCTL_SPKEN_MASK,
>   				LPAIF_I2SCTL_SPKEN_ENABLE);
>   		if (ret)
> @@ -217,7 +217,7 @@ static int lpass_cpu_daiops_trigger(struct snd_pcm_substream *substream,
>   	case SNDRV_PCM_TRIGGER_SUSPEND:
>   	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
>   		ret = regmap_update_bits(drvdata->lpaif_map,
> -				LPAIF_I2SCTL_REG(drvdata->variant, dai->id),
> +				LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id),
>   				LPAIF_I2SCTL_SPKEN_MASK,
>   				LPAIF_I2SCTL_SPKEN_DISABLE);
>   		if (ret)
> @@ -247,7 +247,7 @@ int lpass_cpu_dai_probe(struct snd_soc_dai *dai)
>
>   	/* ensure audio hardware is disabled */
>   	ret = regmap_write(drvdata->lpaif_map,
> -			LPAIF_I2SCTL_REG(drvdata->variant, dai->id), 0);
> +			LPAIF_I2SCTL_REG(drvdata->variant, dai->driver->id), 0);
>   	if (ret)
>   		dev_err(dai->dev, "%s() error writing to i2sctl reg: %d\n",
>   				__func__, ret);
> -----------------------><---------------------------------------------

> In addition to your patch above, I also needed to correct the rdma_port
> assignment by removing the i2s port reference:


> -----------------------><---------------------------------------------
> diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
> index c5907d5..580cae1 100644
> --- a/sound/soc/qcom/lpass-platform.c
> +++ b/sound/soc/qcom/lpass-platform.c
> @@ -91,7 +91,7 @@ static int lpass_platform_pcmops_hw_params(struct snd_pcm_substream *substream,
>   	unsigned int channels = params_channels(params);
>   	unsigned int regval;
>   	int bitwidth;
> -	int ret, rdma_port = pcm_data->i2s_port + v->rdmactl_audif_start;
> +	int ret, rdma_port = v->rdmactl_audif_start;
>
>   	bitwidth = snd_pcm_format_width(format);
>   	if (bitwidth < 0) {
> -----------------------><---------------------------------------------
>
> Please incorporate these fixes into your next patch series.
I think my patch and above change for rdma port are not necessary as the 
rdma_port existing calculation would result 4 anyway, for 
rdmactl_audif_start= 0 and dai->driver->id = 4. Which is correct in MI2S 
case.

Only replacing dai->id to dai->driver->id should fix the issue on storm 
board. So I will drop these two changes in next verion.
--srini
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html