[PATCH v2 01/22] arm64: dts: qcom: pm8350: fix thermal zone node name

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Correct the thermal zone node names to remove the clash with
pm8350c.dtsi. Remove unused labels.

Fixes: 7a79b95f4288 ("arm64: dts: qcom: pm8350: add temp sensor and thermal zone config")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/pm8350.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/pm8350.dtsi b/arch/arm64/boot/dts/qcom/pm8350.dtsi
index 2dfeb99300d7..9fb963df4b41 100644
--- a/arch/arm64/boot/dts/qcom/pm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350.dtsi
@@ -8,19 +8,19 @@
 
 / {
 	thermal-zones {
-		pm8350_thermal: pm8350c-thermal {
+		pm8350-thermal {
 			polling-delay-passive = <100>;
 			polling-delay = <0>;
 			thermal-sensors = <&pm8350_temp_alarm>;
 
 			trips {
-				pm8350_trip0: trip0 {
+				trip0 {
 					temperature = <95000>;
 					hysteresis = <0>;
 					type = "passive";
 				};
 
-				pm8350_crit: pm8350c-crit {
+				crit {
 					temperature = <115000>;
 					hysteresis = <0>;
 					type = "critical";
-- 
2.30.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux