From: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
The qdsp6ss memory region is being shared by ADSP remoteproc device and
lpasscc clock device, hence causing memory conflict.
To avoid this, when qdsp6ss clocks are being enabled in remoteproc driver,
skip qdsp6ss clock registration if "qcom,adsp-pil-mode" is enabled.
Fixes: 4ab43d171181 ("clk: qcom: Add lpass clock controller driver for SC7280")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Signed-off-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
drivers/clk/qcom/lpasscc-sc7280.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/qcom/lpasscc-sc7280.c b/drivers/clk/qcom/lpasscc-sc7280.c
index 5c1e17bd0d76..24aeed6bcf0e 100644
--- a/drivers/clk/qcom/lpasscc-sc7280.c
+++ b/drivers/clk/qcom/lpasscc-sc7280.c
@@ -17,6 +17,8 @@
#include "clk-branch.h"
#include "common.h"
+#define QDSP6SS_MAX_REGISTER 0x3f
+
static struct clk_branch lpass_top_cc_lpi_q6_axim_hs_clk = {
.halt_reg = 0x0,
.halt_check = BRANCH_HALT,
@@ -118,12 +120,15 @@ static int lpass_cc_sc7280_probe(struct platform_device *pdev)
goto destroy_pm_clk;
}
- lpass_regmap_config.name = "qdsp6ss";
- desc = &lpass_qdsp6ss_sc7280_desc;
+ if (!of_property_read_bool(pdev->dev.of_node, "qcom,adsp-pil-mode")) {
+ lpass_regmap_config.name = "qdsp6ss";
+ lpass_regmap_config.max_register = QDSP6SS_MAX_REGISTER;
+ desc = &lpass_qdsp6ss_sc7280_desc;
- ret = qcom_cc_probe_by_index(pdev, 0, desc);
- if (ret)
- goto destroy_pm_clk;
+ ret = qcom_cc_probe_by_index(pdev, 0, desc);
+ if (ret)
+ goto destroy_pm_clk;
+ }
lpass_regmap_config.name = "top_cc";
desc = &lpass_cc_top_sc7280_desc;
--
2.25.1
