On Wed, 29 Mar 2023 at 00:47, Gokul krishna Krishnakumar <quic_gokukris@xxxxxxxxxxx> wrote: > > Adding the full list of VMID's, which are used by different clients to > pass to the secure world. > > Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@xxxxxxxxxxx> > --- > include/dt-bindings/firmware/qcom,scm.h | 31 +++++++++++++++++++++---- > 1 file changed, 26 insertions(+), 5 deletions(-) > > diff --git a/include/dt-bindings/firmware/qcom,scm.h b/include/dt-bindings/firmware/qcom,scm.h > index 1a4e68fa0744..703b6f1750f4 100644 > --- a/include/dt-bindings/firmware/qcom,scm.h > +++ b/include/dt-bindings/firmware/qcom,scm.h > @@ -2,15 +2,36 @@ > /* > * Copyright (c) 2010-2015, 2018-2019 The Linux Foundation. All rights reserved. > * Copyright (C) 2015 Linaro Ltd. > + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. > */ > > #ifndef _DT_BINDINGS_FIRMWARE_QCOM_SCM_H > #define _DT_BINDINGS_FIRMWARE_QCOM_SCM_H > > -#define QCOM_SCM_VMID_HLOS 0x3 > -#define QCOM_SCM_VMID_MSS_MSA 0xF > -#define QCOM_SCM_VMID_WLAN 0x18 > -#define QCOM_SCM_VMID_WLAN_CE 0x19 > -#define QCOM_SCM_VMID_NAV 0x2B These IDs were not changed, but your patch doesn't make that obvious. Please fix the alignment so that old IDs are intact. > +#define QCOM_SCM_VMID_TZ 0x1 > +#define QCOM_SCM_VMID_HLOS 0x3 > +#define QCOM_SCM_VMID_CP_TOUCH 0x8 > +#define QCOM_SCM_VMID_CP_BITSTREAM 0x9 > +#define QCOM_SCM_VMID_CP_PIXEL 0xA > +#define QCOM_SCM_VMID_CP_NON_PIXEL 0xB > +#define QCOM_SCM_VMID_CP_CAMERA 0xD > +#define QCOM_SCM_VMID_HLOS_FREE 0xE > +#define QCOM_SCM_VMID_MSS_MSA 0xF > +#define QCOM_SCM_VMID_MSS_NONMSA 0x10 > +#define QCOM_SCM_VMID_CP_SEC_DISPLAY 0x11 > +#define QCOM_SCM_VMID_CP_APP 0x12 > +#define QCOM_SCM_VMID_LPASS 0x16 > +#define QCOM_SCM_VMID_WLAN 0x18 > +#define QCOM_SCM_VMID_WLAN_CE 0x19 > +#define QCOM_SCM_VMID_CP_SPSS_SP 0x1A > +#define QCOM_SCM_VMID_CP_CAMERA_PREVIEW 0x1D > +#define QCOM_SCM_VMID_CDSP 0x1E > +#define QCOM_SCM_VMID_CP_SPSS_SP_SHARED 0x22 > +#define QCOM_SCM_VMID_CP_SPSS_HLOS_SHARED 0x24 > +#define QCOM_SCM_VMID_ADSP_HEAP 0x25 > +#define QCOM_SCM_VMID_CP_CDSP 0x2A > +#define QCOM_SCM_VMID_NAV 0x2B > +#define QCOM_SCM_VMID_TVM 0x2D > +#define QCOM_SCM_VMID_OEMVM 0x31 > > #endif > -- > 2.39.2 > -- With best wishes Dmitry
