Re: [PATCH V10 3/4] arm64: dts: qcom: Add support for ipq9574 SoC and RDP433 variant

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 28.03.2023 09:31, Devi Priya wrote:
> 
> 
> On 3/27/2023 8:15 PM, Dmitry Baryshkov wrote:
>> On Mon, 27 Mar 2023 at 16:28, Devi Priya <quic_devipriy@xxxxxxxxxxx> wrote:
>>>
>>> Add initial device tree support for Qualcomm IPQ9574 SoC and
>>> Reference Design Platform(RDP) 433 which is based on IPQ9574
>>> family of SoCs
>>>
>>> Co-developed-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
>>> Signed-off-by: Anusha Rao <quic_anusha@xxxxxxxxxxx>
>>> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@xxxxxxxxxxx>
>>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@xxxxxxxxxxx>
>>> Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>
>>> ---
>>>   Changes in V10:
>>>          - Renamed the Board Device Tree Source to use the RDP numbers
>>>          - Updated the Makefile, subject and commit message accordingly
>>>
>>>   arch/arm64/boot/dts/qcom/Makefile           |   1 +
>>>   arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts |  84 ++++++
>>>   arch/arm64/boot/dts/qcom/ipq9574.dtsi       | 270 ++++++++++++++++++++
>>>   3 files changed, 355 insertions(+)
>>>   create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>>>   create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>> index 1a29403400b7..52f1f92c5195 100644
>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>> @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)        += ipq8074-hk01.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)        += ipq8074-hk10-c1.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)        += ipq8074-hk10-c2.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM)        += ipq9574-rdp433.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)        += msm8916-acer-a1-724.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)        += msm8916-alcatel-idol347.dtb
>>>   dtb-$(CONFIG_ARCH_QCOM)        += msm8916-asus-z00l.dtb
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>>> new file mode 100644
>>> index 000000000000..2ce8e09e7565
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>>> @@ -0,0 +1,84 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>>> +/*
>>> + * IPQ9574 RDP433 board device tree source
>>> + *
>>> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "ipq9574.dtsi"
>>> +
>>> +/ {
>>> +       model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
>>> +       compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
>>> +
>>> +       aliases {
>>> +               serial0 = &blsp1_uart2;
>>> +       };
>>> +
>>> +       chosen {
>>> +               stdout-path = "serial0:115200n8";
>>> +       };
>>> +};
>>> +
>>> +&blsp1_uart2 {
>>> +       pinctrl-0 = <&uart2_pins>;
>>> +       pinctrl-names = "default";
>>> +       status = "okay";
>>> +};
>>> +
>>> +&sdhc_1 {
>>> +       pinctrl-0 = <&sdc_default_state>;
>>> +       pinctrl-names = "default";
>>> +       mmc-ddr-1_8v;
>>> +       mmc-hs200-1_8v;
>>> +       mmc-hs400-1_8v;
>>> +       mmc-hs400-enhanced-strobe;
>>> +       max-frequency = <384000000>;
>>> +       bus-width = <8>;
>>> +       status = "okay";
>>> +};
>>> +
>>> +&sleep_clk {
>>> +       clock-frequency = <32000>;
>>> +};
>>> +
>>> +&tlmm {
>>> +       sdc_default_state: sdc-default-state {
>>> +               clk-pins {
>>> +                       pins = "gpio5";
>>> +                       function = "sdc_clk";
>>> +                       drive-strength = <8>;
>>> +                       bias-disable;
>>> +               };
>>> +
>>> +               cmd-pins {
>>> +                       pins = "gpio4";
>>> +                       function = "sdc_cmd";
>>> +                       drive-strength = <8>;
>>> +                       bias-pull-up;
>>> +               };
>>> +
>>> +               data-pins {
>>> +                       pins = "gpio0", "gpio1", "gpio2",
>>> +                              "gpio3", "gpio6", "gpio7",
>>> +                              "gpio8", "gpio9";
>>> +                       function = "sdc_data";
>>> +                       drive-strength = <8>;
>>> +                       bias-pull-up;
>>> +               };
>>> +
>>> +               rclk-pins {
>>> +                       pins = "gpio10";
>>> +                       function = "sdc_rclk";
>>> +                       drive-strength = <8>;
>>> +                       bias-pull-down;
>>> +               };
>>> +       };
>>> +};
>>> +
>>> +&xo_board_clk {
>>> +       clock-frequency = <24000000>;
>>> +};
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>> new file mode 100644
>>> index 000000000000..3bb7435f5e7f
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>> @@ -0,0 +1,270 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>>> +/*
>>> + * IPQ9574 SoC device tree source
>>> + *
>>> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
>>> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
>>> +#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
>>> +
>>> +/ {
>>> +       interrupt-parent = <&intc>;
>>> +       #address-cells = <2>;
>>> +       #size-cells = <2>;
>>> +
>>> +       clocks {
>>> +               bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
>>> +                       compatible = "fixed-clock";
>>> +                       clock-frequency = <353000000>;
>>> +                       #clock-cells = <0>;
>>> +               };
>>
>> What is the source for this clock? With it clocking at 353 MHz, I
>> doubt that it is an external clock.
> bias_pll_ubi_nc_clk (353MHz)is a backup source
> for Q6_AXIM2_CLK
Is this not handled internally by MPSS firmware or RPM
then?

Konrad
/PCIE2_AXIM_CLK/PCIE3_AXIM_CLK/SNOC-CLK
> It is from the CMN_PLL, and is the same as that of PPE core clock.
> Do you suggest to move its clock-frequency to Board DT similar to xo/sleep clock?
>>
>>> +
>>> +               sleep_clk: sleep-clk {
>>> +                       compatible = "fixed-clock";
>>> +                       #clock-cells = <0>;
>>> +               };
>>> +
>>> +               xo_board_clk: xo-board-clk {
>>> +                       compatible = "fixed-clock";
>>> +                       #clock-cells = <0>;
>>> +               };
>>> +       };
>>
>> [skipped the rest]
>>
> Regards,
> Devi Priya



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux