Re: [PATCH v14 14/14] drm/msm/dp: set self refresh aware based on PSR support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Bjorn Andersson (2023-03-26 09:35:56)
> On Sun, Mar 26, 2023 at 09:27:23AM -0700, Bjorn Andersson wrote:
> > On Thu, Mar 02, 2023 at 10:03:17PM +0530, Vinod Polimera wrote:
> > > For the PSR to kick in, self_refresh_aware has to be set.
> > > Initialize it based on the PSR support for the eDP interface.
> > >
> >
> > When I boot my sc8280xp devices (CRD and X13s) to console with this
> > patch included I get a login prompt, and then there are no more screen
> > updates.
> >
> > Switching virtual terminal (ctrl+alt+fN) causes the screen to redraw.
> >
> > Blindly login in and launching Wayland works and from then on screen
> > updates works as expected.
> >
> > Switching from Wayland to another virtual terminal causes the problem to
> > re-appear, no updates after the initial refresh, switching back go the
> > Wayland-terminal crashed the machine.
> >
>
> Also, trying to bring the eDP-screen back from DPMS gives me:
>
> <3>[ 2355.218099] [drm:dp_catalog_ctrl_set_pattern_state_bit [msm]] *ERROR* set state_bit for link_train=1 failed
> <3>[ 2355.218926] [drm:dp_ctrl_setup_main_link [msm]] *ERROR* link training #1 failed. ret=-110
> <3>[ 2355.262859] [drm:dp_catalog_ctrl_set_pattern_state_bit [msm]] *ERROR* set state_bit for link_train=1 failed
> <3>[ 2355.263600] [drm:dp_ctrl_setup_main_link [msm]] *ERROR* link training #1 failed. ret=-110
> <3>[ 2355.305211] [drm:dp_catalog_ctrl_set_pattern_state_bit [msm]] *ERROR* set state_bit for link_train=1 failed
> <3>[ 2355.305955] [drm:dp_ctrl_setup_main_link [msm]] *ERROR* link training #1 failed. ret=-110
> <3>[ 2355.345250] [drm:dp_catalog_ctrl_set_pattern_state_bit [msm]] *ERROR* set state_bit for link_train=1 failed
> <3>[ 2355.346026] [drm:dp_ctrl_setup_main_link [msm]] *ERROR* link training #1 failed. ret=-110
> <3>[ 2355.405650] [drm:dp_display_process_hpd_high [msm]] *ERROR* failed to complete DP link training
> <3>[ 2355.668988] [drm:dpu_encoder_phys_vid_wait_for_commit_done:488] [dpu error]vblank timeout
> <3>[ 2355.669030] [drm:dpu_kms_wait_for_commit_done:510] [dpu error]wait for commit done returned -110
> <3>[ 2355.699989] [drm:dpu_encoder_frame_done_timeout:2398] [dpu error]enc35 frame done timeout
>
> And then the machine just resets.
>

I saw similar behavior on ChromeOS after we picked the PSR patches into
our kernel. I suspect it's the same problem. I switched back and forth
between VT2 and the OOBE screen with ctrl+alt+forward and that showed
what I typed on the virtual terminal after switching back and forth.
It's like the redraw only happens once on the switch and never again. I
switched back and forth enough times that it eventually crashed the
kernel and rebooted. This was on CRD (sc7280-herobrine-crd.dts).

There's an animation on the OOBE screen that is working though, so
perhaps PSR is working with the chrome compositor but not the virtual
terminal? I haven't investigated.



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux