The pmk8280 PMIC PON peripheral is gen3 and uses two sets of registers;
hlos and pbs.
This specifically fixes the following error message during boot when the
pbs registers are not defined:
PON_PBS address missing, can't read HW debounce time
Note that this also enables the spurious interrupt workaround introduced
by commit 0b65118e6ba3 ("Input: pm8941-pwrkey - add software key press
debouncing support") (which may or may not be needed).
Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device")
Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
index c35e7f6bd657..a0ba535bb6c9 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi
@@ -59,8 +59,9 @@ pmk8280: pmic@0 {
#size-cells = <0>;
pmk8280_pon: pon@1300 {
- compatible = "qcom,pm8998-pon";
- reg = <0x1300>;
+ compatible = "qcom,pmk8350-pon";
+ reg = <0x1300>, <0x800>;
+ reg-names = "hlos", "pbs";
pmk8280_pon_pwrkey: pwrkey {
compatible = "qcom,pmk8350-pwrkey";
--
2.39.2
