On 25/03/2023 13:24, Vinod Koul wrote:
> From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
>
> Introduce support for the SC8180X reference device, aka Primus, with
> debug UART, regulators, UFS and USB support.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi | 326 +++++++++
> arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 706 ++++++++++++++++++++
> 3 files changed, 1033 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/sc8180x-primus.dts
>
(...)
> diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
> new file mode 100644
> index 000000000000..9f365fccae78
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
> @@ -0,0 +1,706 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2020-2023, Linaro Limited
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/gpio-keys.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "sc8180x.dtsi"
> +#include "sc8180x-pmics.dtsi"
> +
> +/ {
> + model = "Qualcomm SC8180x Primus";
> + compatible = "qcom,sc8180x-primus", "qcom,sc8180x";
Please run scripts/checkpatch.pl and fix reported warnings.
> +
> + aliases {
> + serial0 = &uart12;
> + serial1 = &uart13;
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pmc8180c_lpg 4 1000000>;
> + enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&bl_pwm_default>;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&hall_int_active_state>;
> +
> + lid-switch {
> + gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
> + linux,input-type = <EV_SW>;
> + linux,code = <SW_LID>;
> + wakeup-source;
> + wakeup-event-action = <EV_ACT_DEASSERTED>;
> + };
> + };
> +
> + reserved-memory {
> + rmtfs_mem: rmtfs-region@85500000 {
> + compatible = "qcom,rmtfs-mem";
> + reg = <0x0 0x85500000 0x0 0x200000>;
> + no-map;
> +
> + qcom,client-id = <1>;
> + qcom,vmid = <15>;
> + };
> +
> + wlan_mem: wlan-region@8bc00000 {
> + reg = <0x0 0x8bc00000 0x0 0x180000>;
> + no-map;
> + };
> +
> + adsp_mem: adsp-region@96e00000 {
> + reg = <0x0 0x96e00000 0x0 0x1c00000>;
> + no-map;
> + };
> +
> + mpss_mem: mpss-region@8d800000 {
> + reg = <0x0 0x8d800000 0x0 0x9600000>;
> + no-map;
> + };
> +
> + gpu_mem: gpu-region@98a00000 {
> + reg = <0x0 0x98a00000 0x0 0x2000>;
> + no-map;
> + };
> +
> + reserved-region@9a500000 {
> + reg = <0x0 0x9a500000 0x0 0x600000>;
> + no-map;
> + };
> + };
> +
> + vreg_nvme_0p9: nvme-0p9-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vreg_nvme_0p9";
> +
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> +
> + regulator-always-on;
> + };
> +
> + vreg_nvme_3p3: nvme-3p3-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vreg_nvme_3p3";
> +
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&pmc8180c_gpios 11 0>;
> + enable-active-high;
> +
> + regulator-always-on;
> + };
> +
> + vdd_kb_tp_3v3: vdd-kb-tp-3v3-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd_kb_tp_3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&tlmm 4 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> +
> + regulator-always-on;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&kb_tp_3v3_en_active_state>;
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> + };
> +
> + vreg_s4a_1p8: pm8150-s4 {
-regulator suffix
> + compatible = "regulator-fixed";
> + regulator-name = "vreg_s4a_1p8";
> +
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> +
> + vin-supply = <&vph_pwr>;
> + };
> +};
> +
> +&apps_rsc {
> + pmc8180-a-rpmh-regulators {
Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).
> + compatible = "qcom,pmc8180-rpmh-regulators";
> + qcom,pmic-id = "a";
> +
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
> +
> + vreg_s5a_2p0: smps5 {
> + regulator-min-microvolt = <2040000>;
> + regulator-max-microvolt = <2100000>;
> + };
> +
> + vreg_l7a_1p8: ldo7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l9a_1p3: ldo9 {
> + regulator-min-microvolt = <1296000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12a_1p8: ldo12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + pmc8180c-rpmh-regulators {
> + compatible = "qcom,pmc8180c-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + vdd-s6-supply = <&vph_pwr>;
> + vdd-s8-supply = <&vph_pwr>;
> + vdd-l2-l3-supply = <&vreg_s6c_1p35>;
> + vdd-bob-supply = <&vph_pwr>;
> +
> + vreg_s6c_1p35: smps6 {
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <1372000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s8c_1p8: smps8 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-always-on;
> + };
> +
> + vreg_l3c_1p2: ldo3 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l4c_3p3: ldo4 {
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l10c_3p3: ldo10 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3312000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l11c_3p3: ldo11 {
> + regulator-min-microvolt = <3296000>;
> + regulator-max-microvolt = <3304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_bob: bob {
> + regulator-min-microvolt = <3296000>;
> + regulator-max-microvolt = <3350000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + pmc8180-e-rpmh-regulators {
> + compatible = "qcom,pmc8180-rpmh-regulators";
> + qcom,pmic-id = "e";
> +
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-l2-l10-supply = <&vreg_bob>;
> + vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>;
> + vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>;
> + vdd-l13-l16-l17-supply = <&vreg_bob>;
> +
> + vreg_s4e_0p98: smps4 {
> + regulator-min-microvolt = <992000>;
> + regulator-max-microvolt = <992000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s5e_2p05: smps5 {
> + regulator-min-microvolt = <2040000>;
> + regulator-max-microvolt = <2040000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1e_0p75: ldo1 {
> + regulator-min-microvolt = <752000>;
> + regulator-max-microvolt = <752000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l5e_0p88: ldo5 {
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <880000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7e_1p8: ldo7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l10e_2p9: ldo10 {
> + regulator-min-microvolt = <2904000>;
> + regulator-max-microvolt = <2904000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12e: ldo12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l16e_3p0: ldo16 {
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3072000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +};
> +
> +&dispcc {
> + status = "okay";
> +};
> +
> +&gpu {
> + status = "okay";
> +
> + zap-shader {
> + memory-region = <&gpu_mem>;
> + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn";
> + };
> +};
> +
> +&i2c1 {
> + clock-frequency = <100000>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&ts_i2c_active_state>;
> +
> + status = "okay";
> +
> + touchscreen@10 {
> + compatible = "hid-over-i2c";
> + reg = <0x10>;
> + hid-descr-addr = <0x1>;
> +
> + vdd-supply = <&vreg_l4c_3p3>;
> + vddl-supply = <&vreg_l12e>;
> +
> + post-power-on-delay-ms = <20>;
> +
> + interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&ts_active_state>;
> + };
> +};
> +
> +&i2c7 {
> + clock-frequency = <100000>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&aux_i2c_active_state>;
> +
> + status = "okay";
> +
> + touchpad@15 {
> + compatible = "hid-over-i2c";
> + reg = <0x15>;
> + hid-descr-addr = <0x1>;
> +
> + interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&tp_int_active_state>;
> +
> + vdd-supply = <&vdd_kb_tp_3v3>;
> + };
> +
> + keyboard@3a {
> + compatible = "hid-over-i2c";
> + reg = <0x3a>;
> + hid-descr-addr = <0x1>;
> + interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&kb_int_active_state>;
> +
> + vdd-supply = <&vdd_kb_tp_3v3>;
> + };
> +};
> +
> +&mdss {
> + status = "okay";
> +};
> +
> +&mdss_edp {
> + data-lanes = <0 1 2 3>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&edp_hpd_active>;
> +
> + status = "okay";
> +
> + aux-bus {
> + panel {
> + compatible = "edp-panel";
> +
> + backlight = <&backlight>;
> +
> + ports {
Are you sure this passes dtbs checks?
Best regards,
Krzysztof
