Re: [PATCH 1/2] ARM: dts: qcom: sdx65: add IPA information

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3/25/23 6:14 AM, Krzysztof Kozlowski wrote:
On 24/03/2023 21:15, Alex Elder wrote:
Add IPA-related nodes and definitions to "sdx65.dtsi".  The SMP2P
nodes (ipa_smp2p_out and ipa_smp2p_in) are already present.

Enable IPA in "sdx65-mtp.dts"; this GSI firmware is loaded by Trust
Zone on this platform.

Tested-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
Signed-off-by: Alex Elder <elder@xxxxxxxxxx>
---
  arch/arm/boot/dts/qcom-sdx65-mtp.dts |  5 ++++
  arch/arm/boot/dts/qcom-sdx65.dtsi    | 38 ++++++++++++++++++++++++++++
  2 files changed, 43 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index ed98c83c141fc..72e25de0db5fc 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -245,6 +245,11 @@ &blsp1_uart3 {
  	status = "okay";
  };
+&ipa {
+	qcom,gsi-loader = "skip";
+	status = "okay";
+};
+
  &qpic_bam {
  	status = "okay";
  };
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 192f9f94bc8b4..360d6dc144811 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -11,6 +11,7 @@
  #include <dt-bindings/interrupt-controller/arm-gic.h>
  #include <dt-bindings/power/qcom-rpmpd.h>
  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/interconnect/qcom,sdx65.h>
/ {
  	#address-cells = <1>;
@@ -299,6 +300,43 @@ tcsr_mutex: hwlock@1f40000 {
  			#hwlock-cells = <1>;
  		};
+ ipa: ipa@3e04000 {
+			compatible = "qcom,sdx65-ipa";
+
+			iommus = <&apps_smmu 0x5e0 0x0>,
+				 <&apps_smmu 0x5e2 0x0>;
+			reg = <0x3f40000 0x10000>,
+			      <0x3f50000 0x5000>,
+			      <0x3e04000 0xfc000>;
+			reg-names = "ipa-reg",
+				    "ipa-shared",
+				    "gsi";
+
+			interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
+					      <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ipa",
+					   "gsi",
+					   "ipa-clock-query",
+					   "ipa-setup-ready";

These look misaligned.

I believe this is the alignment convention used by all IPA nodes
in DTS files.  It's possible I'm not seeing something you are,
but...  what alignment should be used?  And if I change this,
should I change all others?

Thanks.

					-Alex


With above:

Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>


Best regards,
Krzysztof





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux